GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 2198-CAPMOD-1300 |
Series: | 2198 |
UPC: | 886739966493 |
Description:
Part number 2198-CAPMOD-1300, which was designed and manufactured by Allen Bradley, is a capacitor module. It belongs to the Kinetix 5500 series of products. This module has a capacitance rating of 1360 microfarad. This product should be installed on the right-hand side of the drive configuration. It is compatible with a drive systems within the 200- and 400-volt classes. This module has physical dimensions that measure 265 mm x 55 mm x 210 mm.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2198-CAPMOD-1300 is a capacitor module that belongs to the Kinetix 5500 series of products. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This Allen Bradley module provides a capacitance rating of 1360 microfarad for applications where the internal shunt module capacity is exceeded. This Allen Bradley device can either be used by itself or in conjunction with an external shunt module for applications that can produce an excess amount of regenerative power. The Allen Bradley 2198-CAPMOD-1300 is compatible with drives that share direct current (DC) power within a shared bus connection system.
When installing the Allen Bradley 2198-CAPMOD-1300 capacitor module should be placed on the right-hand side of the drive configuration. This capacitor module has physical dimensions that measure 265 millimeters x 55 millimeters x 210 millimeters, or 10.43 inches x 2.16 inches x 8.27 inches (height x width x depth). The Allen Bradley 2198-CAPMOD-1300 is compatible with all drive systems within the 200-volt class, as well as the 400-volt class. This module, as well as Bulletin 2198 drives, may be grounded by wiring them to a bonded cabinet ground bus via a braided ground strap. Another option would be to use a copper wire with a size of 4.0 mm², or the equivalent of 12 AWG, rather than the braided ground strap. This capacitor module has several connectors. These connectors include a module status (MS) connector, a DC bus (DC) connector, and a 24-volt control input power (CP) connector. This device is also equipped with a module status indicator.
Region of Manufacture* | Mexico |
Type | Servo Amplifier |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 2198-CAPMOD-1300?
Answer: Yes. We offer repairs for the 2198-CAPMOD-1300 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 2198-CAPMOD-1300?
Answer: If you buy the 2198-CAPMOD-1300 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2198-CAPMOD-1300 online?
Answer: Yes. Automation Stop sells the 2198-CAPMOD-1300 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2198-CAPMOD-1300?
Answer: The 2198-CAPMOD-1300 is made by Allen Bradley - Miscellaneous.
Question: What Region of Manufacture* does the Rockwell-Automation 2198-CAPMOD-1300 have?
Answer: The 2198-CAPMOD-1300 has a Mexico Region of Manufacture*.
For additional information about 2198-CAPMOD-1300 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2198-CAPMOD-1300.
Revision Part # | Also Known As | Availability |
---|---|---|
2198-CAPMOD-1300/A | 2198-CAPMOD-1300 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.