GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

199-LF1

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 199-LF1
Series: 199
UPC: 10662072235581

Description:

Part number 199-LF1 was designed and produced by Allen Bradley / Rockwell Automation. This product is a terminal lug kit, and it belongs to the Bulletin 199 series of products. This kit was designed to be used with SMC-3, SMC-50, SMC-Flex, and Bulletin 592 devices, such as controllers and motor starters. This terminal lug kit is compatible with controllers and motors starters that have a rated screw torque of 23 Nm, or the equivalent of 200 lb-in. Before using this lug kit, it is important that any part being used with this kit is powered off.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 199-LF1 is a terminal lug kit. It is part of the Bulletin 199 series of products. This terminal lug kit was designed and produced by the company known as Allen Bradley / Rockwell Automation. Various controllers and motor starters require this type of lug setup. Its design and assembly are compatible with the SMC-3, SMC-50, SMC-Flex, and Bulletin 592 devices. In addition, it can use wires that have a size of 16 to 120 mm² to connect with the intelligent motor controllers. This product has a rated screw torque of 23 Nm (Newton-meters), or the equivalent of 200 lb-in. This terminal lug kit is also compatible with three-phase power systems. Apart from that, for safety, users should disconnect the power before configuring their parts using this lug kit. This terminal lug kit is used to assemble and configure Smart Motor Controllers SMC 3. These SMC units have current ranges of 108 to 135 amperes, which require 3 terminal lugs on the line side and load side, and 201 to 251 amperes, which require 6 terminal lugs on the line side and load side. Likewise, this lug kit is also suitable for the SMC flex, especially those using 16 to 120 mm wires. The current range for both SMS types is the same. In addition, it is also used with SMC 50 modules with the same wiring and current ranges. In short, this product is not a generic kit, and was designed to integrate with various series of devices and their parts.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 199-LF1?

Answer: Yes. We offer repairs for the 199-LF1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 199-LF1?

Answer: If you buy the 199-LF1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 199-LF1 online?

Answer: Yes. Automation Stop sells the 199-LF1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 199-LF1?

Answer: The 199-LF1 is made by Allen Bradley - Miscellaneous.


Question: What amperage is included with the Allen Bradley - Miscellaneous 199-LF1?

Answer: The 199-LF1 has a amperage of 200.


Series information for 199-LF1

For additional information about 199-LF1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 199-LF1.

Revision Part # Also Known As Availability
199-LF1/A 199-LF1 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 199-LFI
  • I99-LF1
  • I99-LFI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP