GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 160-BA03NPS1P1 |
Series: | 160 SSC Variable Speed Drives |
Description:
The Allen-Bradley 160 SSC variable speed drive has a power rating of 0.75 Kilowatts (1 horsepower) three phase. It comes with standard features such as hinged finger guard, ready/fault indicating panel, fault and ready indicator LED, DC bus test points, cooling fan, and DIN latch.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 160-BA03NPS1P1 controller has a three-phase motor rating of 0.75 Kilowatts (1 horsepower) and maximum output current of 2.3 Amperes with 40 Watts of power dissipation. The input voltage range is 380 to 460 Volts, three phase with 50/60 Hertz frequency, and it has an operational range of 340 to 506 Volts and input of 2.2 Kilovolt-amperes. The unit is typically fan-cooled. The model has a preset speed option and keypad module for programming. The dynamic breaking torque is 200% with an external module and 100% without one. The output voltage is adjustable from 0 to rated input voltage and output frequency is programmable from 0 to 240 Hertz. The controller efficiency is typically 97.5%. It has standard transient protection of 6 Kilovolts. The enclosure type is IP20 and the unit works within operable ambient temperatures of 0 to 50 degrees Celsius with a storage temperature range of -40 to 85 degrees Celsius without any condensation (relative humidity in the range of 0 to 95%). The vibration of up to 1 g is tolerated while operational and 2.5 g when non-operational. The controller can withstand shock of 15 g in operating conditions and 30 g when in storage or transport (out of service). The unit can operate without derating up to the altitude of 1000 meters (3300 feet). The drive has an internal 12 volts power supply for dry contact inputs which supplies 10 milliampere typical current flow. The start, stop, forward, and reverse signals are configured with two or three wire control input.
Manufacturer | Allen Bradley |
Series | SSC Variable Speed Drive |
Product Type | Drive |
Voltage Rating | 380-460V |
Current Rating | 2.3 |
Enclosure Type | Open (IP20) |
Model | Preset Speed |
Programmer | Program Keypad Module |
MPN | 160BA03-N-PS1-P1 |
Question: Does Automation Stop offer repairs on the 160-BA03NPS1P1?
Answer: Yes. We offer repairs for the 160-BA03NPS1P1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 160-BA03NPS1P1?
Answer: If you buy the 160-BA03NPS1P1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 160-BA03NPS1P1 online?
Answer: Yes. Automation Stop sells the 160-BA03NPS1P1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 160-BA03NPS1P1?
Answer: The 160-BA03NPS1P1 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 160-BA03NPS1P1?
Answer: The 160-BA03NPS1P1 is part of the 160 SSC Variable Speed Drives series.
Question: What Current Rating does the 160-BA03NPS1P1 have?
Answer: The Rockwell Automation 160-BA03NPS1P1 has a Current Rating of 2.3.
Question: What is the Enclosure Type of the Allen Bradley/Rockwell Automation 160-BA03NPS1P1?
Answer: The Enclosure Type of the Allen Bradley/Rockwell Automation 160-BA03NPS1P1 is Open (IP20).
Question: What Model is included with the Rockwell Automation 160-BA03NPS1P1?
Answer: The Rockwell Automation 160-BA03NPS1P1 has a Preset Speed Model.
Question: What Product Type does the Rockwell-Automation 160-BA03NPS1P1 have?
Answer: The Rockwell-Automation 160-BA03NPS1P1 has a Drive Product Type.
Question: What Programmer does the Allen Bradley/Rockwell Automation 160-BA03NPS1P1 have?
Answer: The Allen Bradley/Rockwell Automation 160-BA03NPS1P1 has a Program key Module Programmer.
Question: What Voltage Rating does the 160-BA03NPS1P1 have?
Answer: The 160-BA03NPS1P1 has a Voltage Rating of 380-460V.
For additional information about 160-BA03NPS1P1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 160-BA03NPS1P1.
Revision Part # | Also Known As | Availability |
---|---|---|
160-BA03NPS1P1/A | 160-BA03NPS1P1 Ser A, Series A, Rev A | Request a Quote |
160-BA03NPS1P1/B | 160-BA03NPS1P1 Ser B, Series B, Rev B | Request a Quote |
160-BA03NPS1P1/C | 160-BA03NPS1P1 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.