GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 140M-I8P-C30S-M |
Series: | 140M |
Description:
The Allen-Bradley 140M-I8P-C30S-M is a 3-phase molded case circuit breaker included in the 140M series. It has a current rating of 30 Amperes and requires 600 Volts AC for operation. It has three poles and comes with a magnetic trip range between 90 and 300 Amps.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 140M-I8P-C30S-M is a circuit breaker by Allen-Bradley. This molded case circuit breaker is included in the 140M series. This type of circuit breaker is an assembled unit that is contained inside an insulating material. The molded case circuit breaker (MCCB) combines the short circuit isolation function of miniature circuit breakers (MCBs) and the overcurrent protection functionality of a traditional overload relay. This unit is powered by a 3-phase power supply. It has a current rating of 30 Amperes and requires 600 Volts AC for operation. The 140M-I8P-C30S-M comes with 3 poles. This circuit breaker features instantaneous protection with load side as well as line side lug terminals. The 140M-I8P-C30S-M offers high current limiting features as well as visible trip indication. Automatic overcurrent protection is provided for connected equipment. This device fully complies with CSA and UL standards. It is designed to be fully compatible with NEMA contactors as well as IEC contactors and overload relays. This molded case circuit breaker has a fixed magnetic trip with a current range between 90 Amperes and 300 Amperes. It is designed with a tripping function to protect the system in case of temperatures exceeding safe limits. The normal operating frequency range is between 50 Hertz and 60 Hertz. The supported temperature range is between -25 degrees Celsius and 70 degrees Celsius (-13 to 158 degrees Fahrenheit). This circuit breaker is rated for operation without de-rating at altitudes below 2000 meters.
Manufacturer | Allen Bradley |
Series | 140M |
MPN | 140M-I8P-C30S-M |
Question: Does Automation Stop offer repairs on the 140M-I8P-C30S-M?
Answer: Yes. We offer repairs for the 140M-I8P-C30S-M and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 140M-I8P-C30S-M?
Answer: If you buy the 140M-I8P-C30S-M through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 140M-I8P-C30S-M online?
Answer: Yes. Automation Stop sells the 140M-I8P-C30S-M online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 140M-I8P-C30S-M?
Answer: The 140M-I8P-C30S-M is made by Allen Bradley - Miscellaneous.
For additional information about 140M-I8P-C30S-M check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 140M-I8P-C30S-M.
Revision Part # | Also Known As | Availability |
---|---|---|
140M-I8P-C30S-M/A | 140M-I8P-C30S-M Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.