GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1797-PS2N2

1797-PS2N2 Image 1 thumbnail
1797-PS2N2 Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1797-PS2N2
Series: Flex I/O 1797

Description:

The Allen-Bradley 1797-PS2N2 is a power supply module which belongs to the FLEX Ex Power Supply module series. The device operates with an output power rating of 4 x 8.5 watts and a current consumption of 3.1 amperes.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1797-PS2N2 is a power supply module that belongs to Rockwell Automation’s FLEX Ex Power Supply series of modules. The power supply is an essential component in the operation of an intrinsically safe system. It must isolate the unsafe incoming power from the control system and limit the available energy to IS-safe levels. No other power source is needed to operate the components attached to the FLEX Ex system in a hazardous area. The FLEX Ex modules generate the power required to operate the valves, actuators, and transmitters in the industrial automation system. The 1797-PS2N2 is an in/quad-Ex out power supply in an explosion-proof enclosure with a conduit pipe-thread input and output terminators. The device can be mounted near controlled equipment, thus eliminating long runs of multiple cables, conduit, and messy sealing. A built-in galvanic isolation feature eliminates the need for IS Barriers/isolators. Its advanced diagnostics provide the real-time status of the system to ensure effective troubleshooting.

The Allen-Bradley 1797-PS2N2 can be removed and inserted by the operator when it is powered. This makes it possible to replace the modules and make cable connections in hazardous areas while the system is still in operation. It is rated for Class I, II, and III / Div 1, Zone 1, and 22. This allows the mounting of the module in hazardous locations. The system must be planned as per the number of inputs and outputs. The number of power supplies that are required can be decided accordingly. The 1797-PS2N2 is sensitive to electrostatic discharge and must be protected from it at all times. It is recommended to place a safety sign near the device to prevent any person from touching the device.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series FLEX Ex Power Supply
Part number 1797-PS2N2
Input Connectors 24V DC
Voltage Range 19-32V DC
Current Consumption 3.1 A
Ripple 5% ac
Output Power 4 x 8.5 W
Output Voltage 9.5V DC
Power Dissipation 21W
Thermal Dissipation 71.67 BTU/hour
Operational Temperature 0° to 60° C (32° To 140° F)
Input Power 55W
Shock 30g
Relative Humidity (Operating) 5%-95% non-condensing
Weight 16.1 lbs (7.3 Kg)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1797-PS2N2?

Answer: Yes. We offer repairs for the 1797-PS2N2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1797-PS2N2?

Answer: If you buy the 1797-PS2N2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1797-PS2N2 online?

Answer: Yes. Automation Stop sells the 1797-PS2N2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1797-PS2N2?

Answer: The 1797-PS2N2 is made by Allen Bradley - PLC.


Question: What type of product is the 1797-PS2N2?

Answer: The 1797-PS2N2 is part of the Flex I/O 1797 series.


Question: What Brand is included with the Rockwell-Automation 1797-PS2N2?

Answer: The Rockwell-Automation 1797-PS2N2 has a Allen Bradley (AB) / Rockwell Automation Brand.


Question: What is the Current Consumption of the 1797-PS2N2?

Answer: The Allen Bradley-Rockwell Automation 1797-PS2N2 has a Current Consumption of 3.1 A.


Question: What is the Input Connectors of the Rockwell Automation 1797-PS2N2?

Answer: The 1797-PS2N2 has a Input Connectors of 24 volts DC .


Question: What Input Power does the 1797-PS2N2 have?

Answer: The 1797-PS2N2 has a Input Power of 55W.


Question: What is the Operational Temperature of the Allen Bradley Automation 1797-PS2N2?

Answer: The Operational Temperature of the 1797-PS2N2 is 0° to 60° C (32° To 140° F).


Question: What is the Output Power of the Rockwell-Automation 1797-PS2N2?

Answer: The Output Power of the 1797-PS2N2 is 4 x 8.5 W.


Question: What is the Output Voltage of the Rockwell Automation 1797-PS2N2?

Answer: The Output Voltage of the 1797-PS2N2 is 9.5 volts direct current.


Question: What is the part number of the 1797-PS2N2?

Answer: The 1797-PS2N2 has a unit number of 1797-PS2N2.


Question: What Power Dissipation does the 1797-PS2N2 have?

Answer: The 1797-PS2N2 has a Power Dissipation of 21W.


Question: What Relative Humidity (Operating) does the Rockwell-Automation 1797-PS2N2 have?

Answer: The Relative Humidity (Operating) of the 1797-PS2N2 is 5%-95% non-condensing.


Question: What Ripple does the Rockwell Automation 1797-PS2N2 have?

Answer: The Ripple of the Rockwell Automation 1797-PS2N2 is 5% alternating current (AC).


Question: What Shock does the 1797-PS2N2 have?

Answer: The Shock of the Allen Bradley 1797-PS2N2 is 30g.


Question: What is the Thermal Dissipation of the 1797-PS2N2?

Answer: The Thermal Dissipation of the 1797-PS2N2 is 71.67 BTU/hour.


Question: What Voltage Range does the 1797-PS2N2 have?

Answer: The Voltage Range of the Allen-Bradley 1797-PS2N2 is 19-32 volts direct current.


Question: What Weight does the 1797-PS2N2 have?

Answer: The Allen Bradley 1797-PS2N2 has a Weight of 16.1 lbs (7.3 Kg).


Series information for 1797-PS2N2

For additional information about 1797-PS2N2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1797-PS2N2.

Revision Part # Also Known As Availability
1797-PS2N2/A 1797-PS2N2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1797-P52N2
  • I797-PS2N2
  • I797-P52N2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP