GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-IB16XOB16P |
Series: | 1794 |
UPC: | 10612598279897 |
Description:
Part number 1794-IB16XOB16P is a FLEX I/O combination module that was designed and produced by Allen Bradley / Rockwell Automation. This device is equipped with 16 sink inputs, as well as 16 source outputs. The maximum off-state leakage current is 0.5 milliamperes and the maximum on-state voltage drop is 0.5 volts DC at 1 ampere. This device has a maximum power dissipation of 7.0 watts, and a thermal dissipation rating of 23.9 BTU/hr. The physical dimensions of this device measure 3.7 inches x 3.7 inches x 2.7 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-IB16XOB16P is a FLEX I/O combination module that has sixteen (16) sink inputs and sixteen (16) source outputs. This module was designed and manufactured by Allen Bradley / Rockwell Automation. The terminal bases recommended for this module are the 1794-TB32, 1794-TB32S, and 1794-TB62DS, as well as the 1794-TB62EXD4X15. This Allen Bradley module has a minimum input on-state voltage of ten (10) volts direct current (DC) and a nominal voltage of twenty-four (24) volts direct current (DC), along with a maximum voltage of 31.2 volts direct current (DC). At twenty-four (24) volts direct current (DC), the minimum input on-state current is two (2) milliamperes and the nominal on-state current is 8.8 milliamperes. Additionally, the maximum on-state current is 12.1 milliamperes. The peak input off-state voltage of the 1794-IB16XOB16P is five (5) volts direct current (DC), and the maximum input off-state current is 1.5 milliamperes. The nominal input impedance is 2.5 kilo ohms, and this module has a minimum output on-state voltage of ten (10) volts direct current (DC) along with a nominal output on-state voltage of twenty-four (24) volts direct current (DC). The maximum output on-state voltage of this module is 31.2 volts. The peak on state current on the output per channel is 0.5 amperes, with a minimum of one (1) milliampere and a maximum of eight (8) amperes per module. The maximum output voltage in the off state is 31.2 volts direct current (DC). The surge current for this module is 1.5 amperes for fifty (50) milliseconds and can be repeated every two (2) seconds.
Question: Does Automation Stop offer repairs on the 1794-IB16XOB16P?
Answer: Yes. We offer repairs for the 1794-IB16XOB16P and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-IB16XOB16P?
Answer: If you buy the 1794-IB16XOB16P through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-IB16XOB16P online?
Answer: Yes. Automation Stop sells the 1794-IB16XOB16P online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-IB16XOB16P?
Answer: The 1794-IB16XOB16P is made by Allen Bradley - PLC.
Question: What voltage does the Allen Bradley - PLC 1794-IB16XOB16P have?
Answer: The 1794-IB16XOB16P has a voltage of 24.
For additional information about 1794-IB16XOB16P check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-IB16XOB16P.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-IB16XOB16P/A | 1794-IB16XOB16P Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.