GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-ACNR |
Series: | Flex I/O 1794 |
Description:
The Allen Bradley 1794-ACNR is a Flex I/O ControlNet Adapter. It uses the 1.25 ControlNet protocol for communication. The adapter's data transfer speed is 5 megabytes per second, and its input voltage rating is 19.2 to 31.2 Volts DC. The panel and DIN rail-style mounting options are applicable for this adapter. Its operation shock and vibration contain IEC ratings.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-ACNR is a redundant ControlNet adapter module. This module is the Flex I/O media adapter that uses a ControlNet communication interface for network configuration. It can operate on 19.2 to 31.2 Volts DC input voltage rating, while its isolation voltage range is 850 Volts DC. The module can dissipate 4.6 Watts at 19.2 Volts DC voltage class. Similarly, it can dissipate 5.7 BTU/hr at 19.2 Volts DC. For the 24 Volts external voltage supply, it can draw 200 milliamperes of power consumption. Besides, this adapter can generate a 640 mA flex bus output current rating while its inrush current range is 23 amperes for two milliseconds.
This communication adapter can handle eight Flex I/O modules. This adapter can also include discrete input and output modules, analog input and output modules, and specialty modules in various combinations. It receives controller commands and sends data from the Flex I/O input modules to the Flex I/O output modules.
Additionally, for the communication, its data transfer speed is 5 megabytes per second. Its mounting type is either panel type or DIN rail. This module contains red and green I/O status indicators, and it also has inbuilt support for 2 ControlNet BNC communication ports, and its communication rate is 5M bps.
There must be appropriate operating and storage conditions for the use of this adapter. The users should check the manufacturer’s guidelines for various safety and maintenance best practices.
Question: Does Automation Stop offer repairs on the 1794-ACNR?
Answer: Yes. We offer repairs for the 1794-ACNR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-ACNR?
Answer: If you buy the 1794-ACNR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-ACNR online?
Answer: Yes. Automation Stop sells the 1794-ACNR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-ACNR?
Answer: The 1794-ACNR is made by Allen Bradley - PLC.
Question: What type of product is the 1794-ACNR?
Answer: The 1794-ACNR is part of the Flex I/O 1794 series.
For additional information about 1794-ACNR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-ACNR.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-ACNR/A | 1794-ACNR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.