GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1792D-4BVT4D

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1792D-4BVT4D
Series: 1792D

Description:

The 1792D-4BVT4D is an Input/Output module manufactured by Allen-Bradley. This module has four (4) inputs & four (4) outputs. This input / output module communicates over the DeviceNet network. The sensor source current per connection of this module is 100 milliamperes total. The operational temperature range of this device is -25 to 60 degrees Celsius and the storage temperature range is -25 to 80 degrees Celsius. The relative humidity should remain within the range of 5% to 100%. The dimensions of this product measure 48.26 x 68.6 x 120 millimeters.


Key Features:

  • has devicenet for communication
  • has voltage of 24 volts dc
  • comes with a standalone

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 792D-4BVT4D is an input / output module designed by Allen-Bradley. This product is an ArmorBlock MaXum 4 input / 4 output module. This Allen-Bradley I/O module is a twenty-four (24) volt DC (direct current) Input/Output device. This device communicated through the DeviceNet network. This module does not require an enclosure due to its sealed housing. The four (4) inputs and four (4) outputs located on this device may be accessed via Y splitter cables. The inputs of this device are twenty-four (24) volts DC PNP (sourcing) or NPN (sinking) devices. The outputs of this device, however, are four (4) self-protected twenty-four (24) volt DC outputs that can provide up to one (1.0) ampere of current each.

The sensor source current per connection of this device is one hundred (100) milliamperes total. Additionally, the off-wire sense current is zero-point-five (0.5) milliamperes. This I/O module has an on-state voltage minimum of ten (10) volts DC and a maximum of twenty-five (25) volts DC. The on-state current minimum is two (2) milliamperes and the maximum is ten (10) milliamperes. This module's off-state voltage is five (5) volts DC max while the off-state current is one-point-five (1.5) milliamperes minimum. This module is recommended to only be operated when the surrounding temperature ranges from negative twenty-five (-25) to positive sixty (+60) degrees Celsius (-13 to 140 °F). When storing this I/O module, the surrounding temperature should be maintained within the range of negative twenty-five (-25) to positive eighty (+80) degrees Celsius (-13 to 176 °F). Additionally, the relative humidity of the surrounding area should be 5% to 100%. The dimensions of this I/O module measure 48.26 millimeters x 68.6 millimeters x 120 millimeters.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1792D-4BVT4D?

Answer: Yes. We offer repairs for the 1792D-4BVT4D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1792D-4BVT4D?

Answer: If you buy the 1792D-4BVT4D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1792D-4BVT4D online?

Answer: Yes. Automation Stop sells the 1792D-4BVT4D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1792D-4BVT4D?

Answer: The 1792D-4BVT4D is made by Allen Bradley - PLC.


Question: What amperage does the Allen Bradley - PLC 1792D-4BVT4D have?

Answer: The 1792D-4BVT4D has a amperage of 0.5.


Series information for 1792D-4BVT4D

For additional information about 1792D-4BVT4D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1792D-4BVT4D.

Revision Part # Also Known As Availability
1792D-4BVT4D/A 1792D-4BVT4D Ser A, Series A, Rev A Request a Quote
1792D-4BVT4D/B 1792D-4BVT4D Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1792D-48VT4D
  • I792D-4BVT4D
  • I792D-48VT4D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP