GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1791-32A0 |
Series: | 1791 Block I/O |
Description:
The Allen-Bradley 1791-32A0 is a discrete I/O block. This device has thirty-two (32) inputs, with the inputs being in four (4) groups of eight (8). The nominal input current of this product is 11.0 milliamperes and the nominal input voltage is 120 volts AC. This unit requires an external power source that has a voltage range of 85 to 132 volts AC at 47 to 63 Hz, as well as a current of 150 milliamperes.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1791-32A0 is a discrete input / output (I/O) block that was designed and manufactured by the company known as Allen-Bradley. This product is equipped with thirty-two (32) inputs, with the inputs being in four (4) groups of eight (8). The nominal input current of this Allen-Bradley device is eleven (11.0) milliamperes (mA) while the nominal input voltage is 120 volts alternating current (AC). The on-state voltage range is from 79 to 132 volts AC at a frequency of 47 to 63 hertz (Hz). The maximum off-state voltage of this device is 35 volts. The on-state current minimum is 5 milliamperes at 79 volts at a 60 Hz frequency, while the on-state maximum is 12.3 milliamperes at 132 volts at a 60 Hz frequency. This product's off-state minimum current is 2.3 milliamperes. The input impedance of the Allen-Bradley 1791-32A0 is 15K ohms at 60 Hz.
The Allen-Bradley 1791-32A0 requires an external power source with a voltage of 85 to 132 volts AC, at a frequency range of 47 to 63 Hz (hertz). The external power source should also have a current of 150 milliamperes. This unit's rated power dissipation is 13.62 watts (W). Additionally, the thermal dissipation of this device is 46.44 BTU/hr. The operational temperature for this Allen-Bradley product is 0 - 60 °C, or 32 - 140 °F, while the storage temperature of this device is -40 - 85 °C, or -40 - 185 °F. The relative humidity of the surrounding area must be 5% to 95% non-condensing. The dimensions of this unit measure 176.5 mm x 110.5 mm x 98 mm.
Question: Does Automation Stop offer repairs on the 1791-32A0?
Answer: Yes. We offer repairs for the 1791-32A0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1791-32A0?
Answer: If you buy the 1791-32A0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1791-32A0 online?
Answer: Yes. Automation Stop sells the 1791-32A0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1791-32A0?
Answer: The 1791-32A0 is made by Allen Bradley - PLC.
Question: What type of product is the 1791-32A0?
Answer: The 1791-32A0 is part of the 1791 Block I/O series.
Question: What can I expect the voltage included with the 1791-32A0 to be?
Answer: The 1791-32A0 has a voltage of 120.
For additional information about 1791-32A0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1791-32A0.
Revision Part # | Also Known As | Availability |
---|---|---|
1791-32A0/A | 1791-32A0 Ser A, Series A, Rev A | Request a Quote |
1791-32A0/B | 1791-32A0 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.