GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1791-0A32 |
| Series: | 1791 Block I/O |
| UPC: | 10612598124722 |
Description:
The Allen-Bradley 1791-0A32 is a compact block output module. It has 32 output channels organized in 4 groups of 8 channels in each. The module acts as distributed output module and can communicate with many process controllers using remote input/output protocol. The ouput voltage range of this device is20 to 132 volts AC at a frequency range of 47 to 63 hertz. The dimensions of this product measure 176.5 x 110.5 x 98 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1791-0A32 is an output module that has 32 output channels. The output channels are separated in 4 groups with 8 channels. That is important, because we can separate AC and DC loads. Also every channel can be configured separately using laptop or handheld programmer. The 1791-0A32 can communicate successfully, using remote I/O protocol, with many processors through remote I/O scanners so that main processor and I/O module can be at remote locations, not in the same rack as it was before. This is the network principle in design, but the new design carries with it some new precautions. The maximum output rating is 600 milliamperes operating at 30 degrees Celsius when the device is mounted vertically and 300 milliamperes when operating at the same temperature but with horizontal mounting. System engineer must take care about inrush and continuous load currents in order not to exceed above ratings. The surge (inrush) current is limited to 10 amperes/50 milliseconds, minimum on-state current is 50 milliamperes per output, and output signal delay is 1 millisecond from off to on state but 8.3 milliseconds from on to off state (important for some applications). The output voltage range of this product is twenty to one hundred and thirty-two (20 to 132) volts AC (alternating current) at a frequency range of forty-seven to sixty-three (47 to 63) hertz. The power dissipation is 31.3 watts max and the thermal disspiation is 106.73 BTU/hr max. The recommended temperature range for this product's operation is zero to sixty (0 to 60) degrees Celsius. The dimensions of this device measure 176.5 mm x 110.5 mm x 98 mm.
FAQ
Question: Does Automation Stop offer repairs on the 1791-0A32?
Answer: Yes. We offer repairs for the 1791-0A32 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1791-0A32?
Answer: If you buy the 1791-0A32 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1791-0A32 online?
Answer: Yes. Automation Stop sells the 1791-0A32 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1791-0A32?
Answer: The 1791-0A32 is made by Allen Bradley - PLC.
Question: What type of product is the 1791-0A32?
Answer: The 1791-0A32 is part of the 1791 Block I/O series.
Question: What can I expect the voltage included with the 1791-0A32 to be?
Answer: The 1791-0A32 has a voltage of 120.
Series information for 1791-0A32
For additional information about 1791-0A32 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1791-0A32.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1791-0A32/A | 1791-0A32 Ser A, Series A, Rev A | Request a Quote |
| 1791-0A32/B | 1791-0A32 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
- 1791-OA32
- 179I-0A32
- 179I-OA32
- I791-0A32
- I791-OA32
- I79I-0A32
- I79I-OA32
