GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1788-CNF |
Series: | 1788 |
Description:
The 1788-CNF is a daughtercard module made by Allen-Bradley. It is used to connect FlexLogix and DriveLogix controllers to the ControlNet network. It consumes 440 milliamperes of current at 5 Volts DC and is rated for a power consumption of 2.2 Watts. The thermal dissipation rating is 7.51 BTU per hour.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1788-CNF module is a daughter card made by Allen-Bradley. This module is a ControlNet Network card that supports the FlexLogix and DriveLogix series. It also supports other industrial automation devices that operate on the ControlNet network. The module connects to the network using integrated A and B optical cable connectors. The 1788-CNF features one optical channel that uses the A and B status indicators to show network data transfer status. The module can use the 1786-CP cable to connect to programming terminals using the integrated NAP connector. In order to avoid possible electrical arcing, the module should only be installed or uninstalled while the system has been disconnected from power. The daughter card requires a 5 Volt DC power supply and consumes 2.2 Watts of power. This module is rated for thermal dissipation of 2.2 Watts (7.51 BTU per hour). The operating temperature range is between 0 degrees and 60 degrees Celsius. The ambient storage temperature range is between -40 degrees and 85 degrees Celsius (-40 degrees and 185 degrees Fahrenheit). It is designed for use with a humidity level of 5 to 95%, non-condensing, and it can withstand up to 30 G of operational shock. The 1788-CNF is classified in the CISPR 11: Group 1, Class A (with appropriate enclosure) for emissions.
Question: Does Automation Stop offer repairs on the 1788-CNF?
Answer: Yes. We offer repairs for the 1788-CNF and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1788-CNF?
Answer: If you buy the 1788-CNF through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1788-CNF online?
Answer: Yes. Automation Stop sells the 1788-CNF online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1788-CNF?
Answer: The 1788-CNF is made by Allen Bradley - PLC.
For additional information about 1788-CNF check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1788-CNF.
Revision Part # | Also Known As | Availability |
---|---|---|
1788-CNF/A | 1788-CNF Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.