GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1786-CTK |
Series: | 1786 |
Description:
The 1786-CTK is primarily a cable-stripping instrument by Rockwell Automation. Moreover, it has support blades for stripping PVC and FEP. Besides, the module also features a set of additional connectors, memory razor cartridges, and a pair of memory blades. Furthermore, this product has a memory razor handle, a calibration and flash handle, a knife, a crimping tool, and a set of wire cutters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1786-CTK by Allen-Bradley is a Wiring Installation Toolkit for maintenance and troubleshooting in industrial automation. The toolkit helps reduce the configuration time with its usability for technical staff. The module is highly compatible with the ControlNet coax wiring and this type of product is also widely referred to as Coax Toolkit, the connectors, or cables. The ideal applicability of these hardware components is subject to a particular set of ControlNet Wiring configuration procedures. Besides, this toolkit comes with a user guide for the information, which users must read and follow for a successful installation. Moreover, It would still be better had the users received the technical support of the professionals for following these guidelines for the installation.
In addition, the module is from the product family of 1786 Repeaters designed to be interoperable with Programmable Logic Controllers (PLC) by Allen-Bradley Rockwell Automation. This module can support two cable strips tools, one for polyvinyl chloride-PVC, a widely used electrical cable construction for insulation, and the other for (FEP), a fluoroplastic used as a cable outer to insulate shield temperature sensor wire. In addition, there are two separate memory blade cartridges that this module has and an additional memory blade holder for grip and tightening. Similarly, this hardware component by Allen-Bradley also includes a calibration/flare holder, which aids to the safety of the module for its components. Whereas concerning a heat gun, the module does not support any, and users ought to purchase it separately. In summary, the toolkit is for installation, and the users' caution to the guidelines is necessary to avoid electric noise.
Question: Does Automation Stop offer repairs on the 1786-CTK?
Answer: Yes. We offer repairs for the 1786-CTK and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1786-CTK?
Answer: If you buy the 1786-CTK through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1786-CTK online?
Answer: Yes. Automation Stop sells the 1786-CTK online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1786-CTK?
Answer: The 1786-CTK is made by Allen Bradley - PLC.
For additional information about 1786-CTK check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1786-CTK.
Revision Part # | Also Known As | Availability |
---|---|---|
1786-CTK/A | 1786-CTK Ser A, Series A, Rev A | Request a Quote |
1786-CTK/B | 1786-CTK Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.