Allen-Bradley 1763-L16DWD

The 1763-L16DWD is a MicroLogix 1100 Programmable Controller by Allen-Bradley and Rockwell Automation. It has a power supply voltage of 12 Volts to 24 Volts DC. The 1763-L16DWD has a total of 12 inputs (10 digital and 2 analog), as well as 6 outputs. This hardware has a power consumption of 35 Watts. It has a digital 12/24 Volt DC sink/source and analog input circuit type. The 1763-L16DWD has a relay output circuit type and an operating temperature range between -20 and 65 degrees Celsius. Storage temperature is between -40 and 85 degrees Celsius while relative humidity should be kept between 5% and 95%, non-condensing. The 1763-L16DWD has dimensions of 90 x 110 x 87 millimeters, or 3.5 x 4.33 x 3.43 inches. The approximate shipping weight for this controller is 0.9 kilograms, or 2.0 pounds.

Input specifications include an on-state voltage range between 10…24 Volts DC at 65 degrees Celsius and 10…30 Volts DC at 30 degrees Celsius. Off-state voltage range is 0…5 Volts DC while operating frequency is 0 Hertz – 40 kiloHertz for inputs 0 through 3 and 0 Hertz – 1 kiloHertz for inputs 4+. Minimum on-state current is 2.0 milliAmps at 10 Volts DC, nominal is 8.5 milliAmps at 24 Volts DC, and maximum is 12.0 milliAmps at 30 Volts DC. Off-state leakage current is 1.5 milliAmps maximum while voltage input range is 0…10 Volts DC. Data type for the 1763-L16DWD is 10-bit unsigned integer and it has a 10-bit input resolution. Non-linearity is ± 0.5% of full scale, as is overall accuracy.

The 1763-L16DWD is a controller. It only supports analog data. It can process integer data with ten (10) bits. There are a total of six (6) different relay outputs on this controller. There is one (1) Ethernet port, one (1) RS-232 port, and one (1) RS-485 port on this controller. It has physical dimensions that measure 3.5 inches x 4.33 inches x 3.43 inches. There is one (1) LCD monitor mounted on the front panel. The relay output channels execute the ON/Off commands within as low as ten (10) milliseconds. Ten million (10,000,000) is the mechanical life rating on this controller. It can withstand ten (10) milliamperes of current surge. It supports two analog voltage categories, which include 120 volts AC to 240 volts AC and 125 volts DC. The maximum operating temperature that this module can operate in is 65 degrees Celsius. On the other hand, the lower limit of the operation temperature is -20 degrees Celsius. 

The 1763-L16DWD can absorb an operation shock of 30 G from all three directions. The maximum vibration shock this programmable module can absorb is 1.5 G. To check the data and other application info, this module comes with one keypad and one monitor. The volatile memory requires battery backup, which comes built-in with this controller. There are a total of 6 relay outputs, as well as twelve relay inputs on this programmable controller. The weight of this controller is approximately 2.0 pounds. The power consumption rating of this controller is 35 watts. The nominal impedance rating on this programmable controller is 3.1 kilowatts.