GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1762-IQ8 |
Series: | MicroLogix 1200 |
UPC: | 10612598207203 |
Description:
The 1762-IQ8 is an Allen Bradley MicroLogix 1200 DC input module. This module has eight (8) inputs of twenty-four (24) volts direct current (DC) and operating voltage range of ten (10) to thirty (30) volts direct current (DC). This device supports source & sink wire configuration. This product weighs approximately 0.44 pounds and has physical dimensions of 3.43 in. x 3.425 in. x 1.575 in.. The operating temperature range ambient ranges from -32 to 131 degrees Fahrenheit.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1762-IQ8 is an Allen Bradley MicroLogix 1200 DC input module. This module has 8 inputs of 24 volts direct current (DC) and operating voltage range of ten (10) to thirty (30) volts direct current (DC). It supports source & sink wire configuration. The module has heat dissipation of 3.7 watts and the signal delay of max eight (8) milliseconds for both on and off delay. The maximum inrush current of the module input is 250 mA and input has a nominal impedance of 3K ohms. The module features a single status LED that shows assists in determining the module's operating state and shows power. The 1762 bus interface is used to send and receive DC power at thirty (30), twenty-four (24) and ten (10) volts. The input terminal blocks include a finger-safe cover for wiring. Bit locations from 7 to 0 are used for input terminals. Following the module installation, each channel's operating information must be set. This Allen-Bradley input module has physical dimensions of 3.43 in. x 3.425 in. x 1.575 in. (H x D x W). This device weighs approximately 0.44 pounds (lb.). The Allen-Bradley 1762-IQ8 input module has a recommended ambient operating temperature range of -32 to 131 degrees Fahrenheit. The ambient temperature range suitable for storing this device ranges from -40 to 185 degrees Fahrenheit. Additionally, this device should be stored in an area that has a relative humidity range of 5% to 95%. The module can tolerate up to 30G shock and vibration up to 5G at (10-500 Hz).
Type | PLC Input Module |
Question: Does Automation Stop offer repairs on the 1762-IQ8?
Answer: Yes. We offer repairs for the 1762-IQ8 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1762-IQ8?
Answer: If you buy the 1762-IQ8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1762-IQ8 online?
Answer: Yes. Automation Stop sells the 1762-IQ8 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1762-IQ8?
Answer: The 1762-IQ8 is made by Allen Bradley - PLC.
Question: What type of product is the 1762-IQ8?
Answer: The 1762-IQ8 is part of the MicroLogix 1200 series.
For additional information about 1762-IQ8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1762-IQ8.
Revision Part # | Also Known As | Availability |
---|---|---|
1762-IQ8/A | 1762-IQ8 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.