GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1761-L20AWA-5A |
Series: | MicroLogix 1000 |
UPC: | 10662072766498 |
Description:
Product number 1761-L20AWA-5A is a programmable controller from the MicroLogix 1000 series of products. It was manufactured by Allen Bradley. This controller has a power supply voltage rating of 85 to 264 volts AC at a frequency of 47 to 63 hertz. This product has 4 analog inputs, as well as 1 analog output. This programmable controller has an isolation rating of 1500 volts AC. It has physical dimensions that measure 7.87 inches x 2.87 inches x 3.15 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1761-L20AWA-5A is a MicroLogix 1000 controller manufactured by Allen Bradley/Rockwell Automation as part of the MicroLogix 1000 product line. This unit is an AC power supply controller that comes with up to 25 points of 12 AC inputs, 4 analog inputs, 1 analog output, and 8 relay outputs. It features RS-232 and DF1 communication ports and has a line voltage of 120/240 volts AC. The 1761-L20AWA-5A controller comes with a real input power of 13 watts at 240 volts AC and 12 watts at 120 volts AC with an apparent input power of 27 volt-amps at 240 volts AC and 20 volt-amps at 120 volts AC. It is part of the series A and does not have high-speed I/O, and approximate dimensions of 7.87 x 2.87 x 3.15 inches. It features several LED indicators for status, input, and output. It also has a memory of 1K EEPROM, which can handle up to 737 instruction words 437 and data-table words. Allen Bradley 1761-L20AWA-5A MicroLogix Controller has a maximum of 32 counters and 40 timers. It also has a typical program scan time of 2 milliseconds per Kword and an average input and output scan time of 0.21 milliseconds. It has a sensor power of 24 volts DC with an all-out of 200 milliamps and a maximum capacitive load of 200 µF. The controller has a transformer load 30 volt-amps at 120 volts AC and 33 volt-amps at 240 volts AC. The 1761-L20AWA-5A MicroLogix controller has a response time of 8 milliseconds for AC inputs for nominal filter setting as well as delay time of 20 milliseconds for ON and OFF. It also comes with a minimum power cycle of 50,000 with an isolation rating of 1500 volts AC.
The Allen Bradley 1761-L20AWA-5A MicroLogix 1000 programmable controller has a power supply voltage ranging from 85 volts alternating current (AC) to 264 volts alternating current (AC) at a frequency range of 47 hertz to 63 hertz. This device has a power supply usage rating of 20 volt-amperes at 120 volts alternating current (AC), as well as 27 volt-amperes at 240 volts alternating current (AC). Additionally, the maximum inrush current of this product's power supply is 30 amperes for 8 milliseconds. The recommended maximum terminal screw torque for this Allen Bradley product is 0.9 Newton-meters (N-m), or the equivalent of 8.0 pound-inches (lb-in.). This programmable controller can withstand an operating vibration with a peak-to-peak displacement of 0.381 millimeters at a frequency of 5 hertz to 2 kilohertz. Additionally, it can withstand a non-operating vibration with a peak-to-peak displacement of 0.762 millimeters at a frequency of 5 hertz to 2 kilohertz. The Allen Bradley 1761-L20AWA-5A can even withstand an operating shock rated at a 10 G peak acceleration for a duration of approximately 11 milliseconds, as well as a non-operating shock rated at a 20 G peak acceleration for a duration of approximately 11 milliseconds. Depending on the orientation this device is mounted, it should be operated at a temperature ranging from 0 to 55 degrees Celsius (horizontal mounting) or 0 to 45 degrees Celsius (vertical mounting). This programmable controller should be stored in an area with a temperature range of -40 to 85 degrees Celsius. The humidity levels suitable for this product's operation is 5 to 95 percent non-condensing.
Brand | Allen Bradley/Rockwell Automation |
Part Number | 1761-L20AWA-5A |
Type | General Purpose AC Drive |
Input Type | 120V AC |
Power Supply | 120/240V AC |
Safety Feature | Master Control Relay |
Output Type | Relay |
Digital Outputs | 8 Contact Outputs |
Analog Circuits | 4 Inputs, 1 Output |
Voltage Range | 79-132 Volts AC |
Region of Manufacture* | Korea, Republic of |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1761-L20AWA-5A?
Answer: Yes. We offer repairs for the 1761-L20AWA-5A and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1761-L20AWA-5A?
Answer: If you buy the 1761-L20AWA-5A through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1761-L20AWA-5A online?
Answer: Yes. Automation Stop sells the 1761-L20AWA-5A online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1761-L20AWA-5A?
Answer: The 1761-L20AWA-5A is made by Allen Bradley - PLC.
Question: What type of product is the 1761-L20AWA-5A?
Answer: The 1761-L20AWA-5A is part of the MicroLogix 1000 series.
Question: What is the Analog Circuits of the 1761-L20AWA-5A?
Answer: The Analog Circuits of the 1761-L20AWA-5A is 4 Inputs, 1 Output.
Question: What Brand is included with the Rockwell Automation 1761-L20AWA-5A?
Answer: The 1761-L20AWA-5A has a Allen Bradley/Rockwell Automation Brand.
Question: What Digital Outputs does the Allen Bradley-Rockwell Automation 1761-L20AWA-5A have?
Answer: The Digital Outputs of the Allen Bradley-Rockwell Automation 1761-L20AWA-5A is 8 Contact Outputs.
Question: What is the Input Type of the 1761-L20AWA-5A?
Answer: The 1761-L20AWA-5A has a Input Type of 120 volts alternating current (AC).
Question: What Output Type is included with the 1761-L20AWA-5A?
Answer: The 1761-L20AWA-5A has a Relay Output Type.
Question: What is the part Number of the Rockwell-Automation 1761-L20AWA-5A?
Answer: The Rockwell-Automation 1761-L20AWA-5A has a unit Number of 1761-L20AWA-5A .
Question: What power supply does the 1761-L20AWA-5A have?
Answer: The power supply of the 1761-L20AWA-5A is 120/240 volts alternating current (AC).
Question: What Region of Manufacture* does the 1761-L20AWA-5A have?
Answer: The Rockwell-Automation 1761-L20AWA-5A has a Korea, Republic of Region of Manufacture*.
Question: What Safety Feature is included with the Allen Bradley-Rockwell Automation 1761-L20AWA-5A?
Answer: The Allen Bradley-Rockwell Automation 1761-L20AWA-5A has a Master Control Relay Safety Feature.
Question: What is the Voltage Range of the 1761-L20AWA-5A?
Answer: The Rockwell Automation 1761-L20AWA-5A has a Voltage Range of 79-132 Volts AC (alternating current).
For additional information about 1761-L20AWA-5A check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1761-L20AWA-5A.
Revision Part # | Also Known As | Availability |
---|---|---|
1761-L20AWA-5A/A | 1761-L20AWA-5A Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.