GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1761-L10BXB |
Series: | MicroLogix 1000 |
Description:
Part number 1761-L10BXB is a MicroLogix 1000 programmable logic controller, or PLC. This device has a power supply voltage of 20.4 to 26.4 volts DC. Its rated power supply usage is 5 watts at 24 volts Dc. It has a maximum power supply inrush current of 30 amperes for 4 milliseconds. It has an RS-232 communication port. This device has physical dimensions that measure 80 mm x 120 mm x 40 mm (height x length x depth).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1761-L10BXB is a MicroLogix 1000 controller manufactured by Allen-Bradley/Rockwell Automation as part of the MicroLogix 1000 product line. This controller small, programmable and can fit in small panel space. It supports the EtherNet/IP network for communication purposes. These types of communication support program upload and download, direct connection, SCADA applications half-duplex slave protocol, and peer-to-peer communication. This controller has over 65 instructions for applications such as shift registers, high-speed counter, and sequencer. Additionally, it can support and runs various programs and operates in five different languages. Allen Bradley 1761-L10BXB MicroLogix 1000 controller features 10 input and output points with 24 volts DC sink and source 6 inputs, 2, 24 volts DC outputs and 2 contact outputs. The controller comes with a real input power of 5 watts at 24 volts DC, and also has a 1500 volts AC isolation voltage with 1K-word EEPROM memory. This 1761-L10BXB controller has a program scan time of 2 milliseconds and its input and output scan time of 0.21 milliseconds with a maximum of 40 timers and 32 counters. It comes with a master control relay safety function and can be installed using either DIN rail or by mounting screw method leaving sufficient spacing in the enclosure for dissipation of heat. This controller is designed and intended for use in the category II non-hazardous industrial environment with operating temperature range of 0 - 55 degrees Celsius and maximum operation shock of 20g.
The Allen-Bradley 1761-L10BXB is a programmable logic controller (PLC). The Allen-Bradley 1761-L10BXB is a MicroLogix 1000 series controller. Designed to meet the needs of micro and low-end automation, this controller includes internally allocated 1K EEPROM memory for 737 words of command and 437 words of data. It has a compact form factor and can be DIN rail or panel mounted. The 1761-L10BXB is a small controller with ten (10) built-in I/O channels, including six (6) 24-volt DC inputs, two (2) 24-volt DC source outputs, and two (2) relay outputs. In addition, this controller includes an RS-232 communications port that can be used to communicate with the device via cables manufactured by Allen-Bradley. The 1761-CBLPM02 Series C, 1761-CBLHM02 Series C, 1761-CBLAM00 Series C, 1761-CBLAP00 Series C, 1761-CBLPH02 Series A, and 1761-CBLAH02 Series A are examples of these supported cables. Suitable cables for connecting to the HMI also include the 2707-NC8 Series B, 2707-NC9 Series B, 2707-NC10 Series B, and 2707-NC11 Series B cables. This device has a maximum inrush current of 30 amperes for four (4) milliseconds. This controller a minimum life cycle of 50,000 power cycles. It includes an RS-232C interface.
Brand | Allen Bradley/Rockwell Automation |
Part Number | 1761-L10BXB |
Type | General Purpose AC Drive |
Input Voltage | 24V dc |
Output Type | Relay/24V dc |
Power Supply | 24V dc |
Digital Output | 2 Contact Outputs, 2 Source 24V DC |
Safety Feature | Master Control Relay |
Question: Does Automation Stop offer repairs on the 1761-L10BXB?
Answer: Yes. We offer repairs for the 1761-L10BXB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1761-L10BXB?
Answer: If you buy the 1761-L10BXB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1761-L10BXB online?
Answer: Yes. Automation Stop sells the 1761-L10BXB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1761-L10BXB?
Answer: The 1761-L10BXB is made by Allen Bradley - PLC.
Question: What type of product is the 1761-L10BXB?
Answer: The 1761-L10BXB is part of the MicroLogix 1000 series.
Question: What Brand is included with the 1761-L10BXB?
Answer: The Rockwell-Automation 1761-L10BXB has a Allen Bradley/Rockwell Automation Brand.
Question: What Digital Output does the Allen Bradley 1761-L10BXB have?
Answer: The Digital Output of the 1761-L10BXB is 2 Contact Outputs, 2 Source 24 volts direct current.
Question: What Input Voltage does the 1761-L10BXB have?
Answer: The Allen Bradley Automation 1761-L10BXB has a Input Voltage of 24 volts direct current.
Question: What is the Output Type of the Allen Bradley/Rockwell Automation 1761-L10BXB?
Answer: The 1761-L10BXB has a Output Type of Relay/24 volts direct current.
Question: What is the part Number of the Rockwell Automation 1761-L10BXB?
Answer: The part Number of the 1761-L10BXB is 1761-L10BXB .
Question: What power supply component does the Allen Bradley 1761-L10BXB have?
Answer: The power supply component of the Allen Bradley 1761-L10BXB is 24 volts DC (direct current).
Question: What Safety Feature is included with the Allen Bradley 1761-L10BXB?
Answer: The Allen Bradley 1761-L10BXB has a Master Control Relay Safety Feature.
For additional information about 1761-L10BXB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1761-L10BXB.
Revision Part # | Also Known As | Availability |
---|---|---|
1761-L10BXB/A | 1761-L10BXB Ser A, Series A, Rev A | Request a Quote |
1761-L10BXB/B | 1761-L10BXB Ser B, Series B, Rev B | Request a Quote |
1761-L10BXB/C | 1761-L10BXB Ser C, Series C, Rev C | Request a Quote |
1761-L10BXB/D | 1761-L10BXB Ser D, Series D, Rev D | Request a Quote |
1761-L10BXB/E | 1761-L10BXB Ser E, Series E, Rev E | Request a Quote |
1761-L10BXB/F | 1761-L10BXB Ser F, Series F, Rev F | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.