GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1760-L18AWA |
Series: | 1760 |
Description:
This Pico controller module designed and produced by Allen Bradley features twelve (12) inputs, along with six (6) isolated relay outputs. This device has a real-time clock and can timestamp crucial data. At 115 to 120 volts alternating current (AC) and 230 to 240 volts alternating current (AC), the 1760-L18AWA uses 10 volts-ampere nominally. Furthermore, if the voltage of this device, along with the extension module, ever surpasses four hundred (400) volts AC, both devices may be seriously damaged.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1760-L18AWA is a Pico controller module that was designed and manufactured by Allen Bradley / Rockwell Automation. This module features 12 inputs and 6 relay outputs with a voltage rating of 100 to 240 volts alternating current (AC). The module is not analog. This device does have a real time clock and a display with a keypad. Furthermore, the module has a frequency rating of 50 to 60 hertz, with a tolerance of 5 percent. Moreover, the line current is nominally 70 milliamperes at 115 to 120 volts AC at a frequency of 60 hertz and 35 milliamperes at 230 to 240 volts alternating current (AC) at 50 hertz. Voltage dips of 20 milliseconds are possible with the module, according to EN 61131-2. The power consumption of the 1760-L18AWA is 10 volts-ampere nominal at 115 to 120 volts alternating current (AC) and 230 to 240 volts AC. In addition to everything that has been stated, if the voltage between the 1760-L18AWA module and the extension module ever surpasses 400 volts AC, both devices may be seriously damaged. There is no electrical separation between the 12 digital inputs on the Allen Bradley 1760-L18AWA. The power source is not isolated electrically, but it is available at the output and this module contains six relay outputs, each in a group of one. It is not permitted to link outputs in parallel to boost output and the output relays are protected by a small circuit breaker B16 or a fuse rated at 8 amperes (slow). With enhanced insulation, the output is isolated from the power supply and inputs of 300 volts AC.
Question: Does Automation Stop offer repairs on the 1760-L18AWA?
Answer: Yes. We offer repairs for the 1760-L18AWA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1760-L18AWA?
Answer: If you buy the 1760-L18AWA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1760-L18AWA online?
Answer: Yes. Automation Stop sells the 1760-L18AWA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1760-L18AWA?
Answer: The 1760-L18AWA is made by Allen Bradley - PLC.
For additional information about 1760-L18AWA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1760-L18AWA.
Revision Part # | Also Known As | Availability |
---|---|---|
1760-L18AWA/A | 1760-L18AWA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.