GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-IF16 |
Series: | ControlLogix |
UPC: | 10612598171788 |
Description:
The Allen-Bradley ControlLogix Analog Input Module with 16 single, 8 differential, 4 highspeed differential Inputs. Voltage and current ratings of the backplane are 5.1 Volts DC 150 milliamperes, and 24 Volts DC 65 milliamperes. It has a maximum input current rating of 1.5 milliamperes.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Rockwell Automation 1756-IF16 is a non-isolated analog current/voltage I/O module. In order to connect to a ControlLogix chassis, it requires an RTB, or a removable terminal block housing, of either the 1756-TBS6H or 1756-TBCH. This input module has 16 points available. These points allow users to wire the module in different ways, unlike other modules. The 1756-IF16 can be wired using three different methods, depending on the user's and application's requirements: single-ended wiring, differential wiring, and high-speed mode differential wiring. The single-ended wiring method is best when all input devices are tied to a common ground. This is for comparing one side of the signal input to signal ground to get the difference, which is then used by the module in generating digital data for the controller. 16 single-ended wirings can be done. When applications do not have a common ground or can have separate signal pairs, using the differential wiring method is recommended. This wiring method is also for environments where an improved noise immunity is needed. The channels in a differential mode are not completely isolated from each other.
One channel may affect the reading of another channel if multiple differential input signals have different voltage common references. When this happens, users should wire the input on different modules or replace the non-isolated module with an isolated input module. Eight (8) connections are allowed in this mode. Lastly, the high-speed mode differential wiring method allows for the fastest possible data updates. However, certain conditions are required for users to be able to use the high-speed mode. First, it uses the differential wiring method. Second, when in this mode, only one of every four channels on the module can be used. The power consumption of the 1756-IF16 module is 2.3 Watts and it has a total backplane power of 2.33 Watts. The input range is ± 10 Volts, from 0 to 10 Volts, 0 to 5 Volts, or 0 to 20 milliamperes. The current draw of this module at 5.1 Volts is 150 milliamperes, or is 65 milliamperes at 24 Volts. The voltage and current ratings of the backplane are 5.1 Volts DC, 150 milliamperes at maximum, and 24 Volts DC 65 milliamperes at maximum. The input current range is from 4 to 20 milliamperes and the input voltage range is from -10 to 10 Volts and limited to 100 Volt-amperes. The Voltage power dissipation is around 2.3 Watts and the current power dissipation is 3.9 Watts. The thermal dissipation for the voltage is 7.84 British Thermal Units (BTU) per hour and 13.3 BTU per hour for current. It also has a maximum overvoltage protection of 30 Volts DC (voltage) and 8 Volts DC (current).
Type | Analog Input Module |
Brand | Allen-Bradley/Rockwell Automation |
Product Family | ControlLogix |
Product Type | Analog Input Module |
Inputs | 16 Single, 8 Differential, 4 High-Speed Differential |
Voltage Backplane Rating | 5.1 Volts DC, 15 milliamperes |
Current Backplane Rating | 24 Volts DC, 65 milliamperes |
Maximum Off-State Input Current | 1.5 milliamperes |
Points per Input | 16 |
Single-Ended Wiring | Yes |
Differential Wiring | Yes |
High-Speed Mode Differential Wiring | Yes |
Power Consumption | 2.3 Watts |
Total Backplane Power | 2.33 Watts |
Current Draw (5.1 Volts) | 150 milliamperes |
Current Draw (24 Volts) | 65 milliamperes |
Current Power Dissipation | 3.9 Watts |
Thermal Dissipation (Voltage) | 7.84 British Thermal Units (BTU) per Hour |
Thermal Dissipation (Current) | 13.3 British Thermal Units (BTU) per Hour |
Question: Does Automation Stop offer repairs on the 1756-IF16?
Answer: Yes. We offer repairs for the 1756-IF16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-IF16?
Answer: If you buy the 1756-IF16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-IF16 online?
Answer: Yes. Automation Stop sells the 1756-IF16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-IF16?
Answer: The 1756-IF16 is made by Allen Bradley - PLC.
Question: What type of product is the 1756-IF16?
Answer: The 1756-IF16 is part of the ControlLogix series.
Question: What Brand is included with the 1756-IF16?
Answer: The Rockwell-Automation 1756-IF16 has a Allen Bradley/Rockwell Automation Brand.
Question: What Current Backplane Rating does the Rockwell Automation 1756-IF16 have?
Answer: The 1756-IF16 has a Current Backplane Rating of 24 Volts direct current, 65 milliamperes.
Question: What is the Current Draw (24 Volts) of the 1756-IF16?
Answer: The 1756-IF16 has a Current Draw (24 Volts) of 65 milliamperes.
Question: What Current Draw (5.1 Volts) does the Rockwell-Automation 1756-IF16 have?
Answer: The Rockwell-Automation 1756-IF16 has a Current Draw (5.1 Volts) of 150 milliamperes.
Question: What Current Power Dissipation does the Rockwell-Automation 1756-IF16 have?
Answer: The Rockwell-Automation 1756-IF16 has a Current Power Dissipation of 3.9 Watts.
Question: Does the 1756-IF16 have a Differential Wiring?
Answer: Yes.
Question: Does the 1756-IF16 have a High-Speed Mode Differential Wiring?
Answer: Yes.
Question: What is the Inputs of the 1756-IF16?
Answer: The Inputs of the Allen Bradley-Rockwell Automation 1756-IF16 is 16 Single, 8 Differential, 4 High-Speed Differential.
Question: What Maximum Off-State Input Current does the Allen-Bradley 1756-IF16 have?
Answer: The Maximum Off-State Input Current of the 1756-IF16 is 1.5 milliamperes.
Question: What is the Points per Input of the 1756-IF16?
Answer: The Points per Input of the Allen Bradley/Rockwell Automation 1756-IF16 is 16.
Question: What is the Power Consumption of the Allen-Bradley 1756-IF16?
Answer: The 1756-IF16 has a Power Consumption of 2.3 Watts.
Question: What Product Family is included with the Rockwell Automation 1756-IF16?
Answer: The 1756-IF16 has a ControlLogix Product Family.
Question: What Product Type is included with the Allen Bradley/Rockwell Automation 1756-IF16?
Answer: The Allen Bradley/Rockwell Automation 1756-IF16 has a Analog Input Module Product Type.
Question: Does the 1756-IF16 have a Single-Ended Wiring?
Answer: Yes.
Question: What is the Thermal Dissipation (Current) of the 1756-IF16?
Answer: The Thermal Dissipation (Current) of the Rockwell-Automation 1756-IF16 is 13.3 British Thermal Units (BTU) per Hour.
Question: What is the Thermal Dissipation (Voltage) of the 1756-IF16?
Answer: The Thermal Dissipation (Voltage) of the Rockwell-Automation 1756-IF16 is 7.84 British Thermal Units (BTU) per Hour.
Question: What is the Total Backplane Power of the 1756-IF16?
Answer: The Allen Bradley 1756-IF16 has a Total Backplane Power of 2.33 Watts.
Question: What Voltage Backplane Rating does the Allen-Bradley 1756-IF16 have?
Answer: The 1756-IF16 has a Voltage Backplane Rating of 5.1 Volts DC, 15 milliamperes.
For additional information about 1756-IF16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-IF16.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-IF16/A | 1756-IF16 Ser A, Series A, Rev A | Request a Quote |
1756-IF16/B | 1756-IF16 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.