GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-IA16 |
Series: | ControlLogix |
UPC: | 10612598171276 |
Description:
The 1756-IA16 is 132 volts alternating current 16-point input module. This module has various industrial functions on ControlLogix systems. It is also part of the 1756 series of digital I/O modules.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1756-IA16 is an Allen-Bradley complex Logix module. It has a DIN rail which makes it flexible during the installation. It measures 8 by 8 by 4 inches. This module houses 16 inputs equivalent to 8 groups. Its total backplane power is 0.58 Watts. The module’s operating voltage of 1756IA16 ranges between 74 and 132 volts alternating current and 50 or 60 Hertz. At off-state, its voltage is 20 volts at maximum and 13 milliamperes maximum on-state current at 132 volts alternating current. Its inrush maximum current is 250 milliamperes peak. The 1756TBNH and 1756TBSJH are the housing removable terminal block and their isolation voltage is 125 volts continuous. The producer-consumer interface technology used by this module enhances allows the sharing of inputs and output status among multiple controllers. The main function of this module is to boost control and communication between the machine and the operator. This module is easily installed, it also has complete instructions and a jumper bar for installing the thermocouple module. During the mounting of this module on a ControlLogix chassis, a removable terminal block or 1492 interface module is needed in order to connect the field-side wiring. For the digital modules, the interface modules use pre-wired cables for output terminal blocks. The 1756-IA16 has a cyclic time of 200 microseconds and 750 milliseconds and a timestamp input of plus or minus 200 microseconds.it has one slot width and one key switch position. Its north American temperature code is T4. This module has self-diagnostic tools that detect faults during operation thus reducing the repair and troubleshooting time.
Region of Manufacture* | United States |
Type | PLC Input Module |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1756-IA16?
Answer: Yes. We offer repairs for the 1756-IA16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-IA16?
Answer: If you buy the 1756-IA16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-IA16 online?
Answer: Yes. Automation Stop sells the 1756-IA16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-IA16?
Answer: The 1756-IA16 is made by Allen Bradley - PLC.
Question: What type of product is the 1756-IA16?
Answer: The 1756-IA16 is part of the ControlLogix series.
Question: What Region of Manufacture* does the 1756-IA16 have?
Answer: The Allen Bradley Automation 1756-IA16 has a United States Region of Manufacture*.
For additional information about 1756-IA16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-IA16.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-IA16/A | 1756-IA16 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.