GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1756-DMD30

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-DMD30
Series: 1756
UPC: 10612598282798

Description:

The 1756-DMD30 is a Drive Module by Allen-Bradley and Rockwell Automation. This device is interfaced with power module to provide torque, position, and velocity control.


Key Features:

  • has an operating temperature of 32 to 140 degrees fahrenheit

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This 1756-DMD30 is a single-slot industrial ControlLogix module which enables device interfacing with the Reliance Electric Distributed Power System (DPS) equipment. It is manufactured and branded by Allen-Bradley and Rockwell Automation. Each 1756-DMD30 module interfaces with an individual Power Module Interface (PMI) chassis and it performs outer torque, position, and velocity control. The 1756-DMD30 module by Allen-Bradley and Rockwell Automation works with SD3000 Six (6) Pulse DPS equipment system which is an S6 DC drive and an S6R resolver and with the SD3000 12-Pulse equipment system which is an S12 DC drive and S12R resolver.

The 1756-DMD30 ControlLogix module is installed inside a ControlLogix chassis and it communicates to the SynchLink nodes through the fiber optic network. The 1756-DMD30 module also connects to PMI chassis through fiber optic cables. The 1756-DMD30 module current consumption rating at 24 Volts DC is 3 milliamperes and at 5.1 Volts DC, it is 1.35 Amperes. The peak module power dissipation is 6.96 Watts and the thermal dissipation is 23.7 British Thermal Units (BTU) per hour. Green and red indicators are provided on the module for diagnostics, status, and operation updates. The storage and operating temperature ranges are -40 to 185 degrees Fahrenheit and 32 to 140 degrees Fahrenheit, respectively.

Technical Specifications

Region of Manufacture* United States
Type Servo Control Module
Brand Allen-Bradley/Rockwell Automation
Backplane Current 1.35 Amperes at 5.1 Volts DC, 3.0 milliamperes at 24 Volts DC
Maximum Power Dissipation 6.96 Watts
Operating Temperature 0 to 60° Celsius
Storage Temperature -40 to 85° Celsius
Module Location 1756 ControlLogix Chassis
Vibration Tested 2g at 10-500 Hertz per IEC 68-2-6
Connection Type Fiber Optic
Operating Voltage 24 Volts DC
Minimum Cable Length 1 Meter

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1756-DMD30?

Answer: Yes. We offer repairs for the 1756-DMD30 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-DMD30?

Answer: If you buy the 1756-DMD30 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-DMD30 online?

Answer: Yes. Automation Stop sells the 1756-DMD30 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-DMD30?

Answer: The 1756-DMD30 is made by Allen Bradley - PLC.


Question: What is the Backplane Current of the 1756-DMD30?

Answer: The Backplane Current of the 1756-DMD30 is 1.35 Amperes at 5.1 Volts direct current, 3.0 milliamperes at 24 Volts direct current.


Question: What Brand does the Allen Bradley Automation 1756-DMD30 have?

Answer: The 1756-DMD30 has a Allen Bradley (AB)/Rockwell Automation Brand.


Question: What Connection Type does the Rockwell Automation 1756-DMD30 have?

Answer: The 1756-DMD30 has a Fiber Optic Connection Type.


Question: What is the Maximum Power Dissipation of the 1756-DMD30?

Answer: The 1756-DMD30 has a Maximum Power Dissipation of 6.96 Watts.


Question: What is the Minimum Cable Length of the 1756-DMD30?

Answer: The Minimum Cable Length of the Allen Bradley 1756-DMD30 is 1 Meter.


Question: What is the Module Location of the 1756-DMD30?

Answer: The 1756-DMD30 has a Module Location of 1756 ControlLogix Chassis.


Question: What is the Operating Temperature of the 1756-DMD30?

Answer: The 1756-DMD30 has a Operating Temperature of 0 to 60° Celsius.


Question: What is the Operating Voltage of the Allen Bradley 1756-DMD30?

Answer: The 1756-DMD30 has a Operating Voltage of 24 Volts direct current.


Question: What Region of Manufacture* does the Rockwell Automation 1756-DMD30 have?

Answer: The Rockwell Automation 1756-DMD30 has a United States Region of Manufacture*.


Question: What Storage Temperature does the 1756-DMD30 have?

Answer: The Storage Temperature of the Allen Bradley-Rockwell Automation 1756-DMD30 is -40 to 85° Celsius.


Question: What Vibration does the Rockwell-Automation 1756-DMD30 have?

Answer: The Vibration of the Rockwell-Automation 1756-DMD30 is Tested 2g at 10-500 Hertz per IEC 68-2-6.


Series information for 1756-DMD30

For additional information about 1756-DMD30 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-DMD30.

Revision Part # Also Known As Availability
1756-DMD30/A 1756-DMD30 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1756-DMD3O
  • 175G-DMD30
  • 175G-DMD3O
  • 17S6-DMD30
  • 17S6-DMD3O
  • 17SG-DMD30
  • 17SG-DMD3O
  • I756-DMD30
  • I756-DMD3O
  • I75G-DMD30
  • I75G-DMD3O
  • I7S6-DMD30
  • I7S6-DMD3O
  • I7SG-DMD30
  • I7SG-DMD3O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP