GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1755-L1 |
Series: | 1755 |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, part number 1755-L1 is a GuardPLC 200 controller. This controller belongs to the Bulletin 1755 series of products. This device has an operating voltage of 3.3 volts DC, as well as 5 volts DC. It has a rated current consumption of 1.5 amperes at 3.3 volts, 0.1 amperes at 5 volts, and 1.0 ampere at 24 volts. This controller should be operated within a temperature range of 0 - 60 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1755-L1 is a controller from the Bulletin 1755 product family. This Allen Bradley device is a GuardPLC 2000 controller. This module is an essential part of the I/O modules, relays, and analog output modules specially designed to support the hardware components of the said modules. This controller operates on 3.3 volts DC to 5 volts DC. This controller has an available memory consisting of 500 kilobytes of application code memory, as well as 500 kilobytes of application data memory. The module can consume 1.5 amperes at 3.3 volts DC, 0.1 amperes at 5 volts DC, and 1 ampere at 24 volts DC. Additionally, this device can draw 1.5 amperes at 3.3 volts DC and 1 ampere at the 34 volts DC. It is critical to maintaining this controller's temperature rating to ensure its full potential. In this regard, the manufacturer recommends the ambient temperature range from -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit, when storing. When operating this controller, however, the temperature should range from 0 to 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. This product also meets many standards, such as UL, and has been listed by the CE, and C-Tick. Users can mount one (1) Ethernet connector and two (2) ASCII connectors on the front of this module. This controller has an approximate weight of 280 grams, or the equivalent of 0.62 pounds.
Question: Does Automation Stop offer repairs on the 1755-L1?
Answer: Yes. We offer repairs for the 1755-L1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1755-L1?
Answer: If you buy the 1755-L1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1755-L1 online?
Answer: Yes. Automation Stop sells the 1755-L1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1755-L1?
Answer: The 1755-L1 is made by Allen Bradley - PLC.
For additional information about 1755-L1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1755-L1.
Revision Part # | Also Known As | Availability |
---|---|---|
1755-L1/A | 1755-L1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.