GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1746-IN16 |
Series: | SLC 500 |
UPC: | 10662468092743 |
Description:
This Allen-Bradley SLC 500 Digital DC Input Module consists of 16 sinking channels. It has a minimum heat dissipation of 0.425W and a maximum of 6W with 0.35W per point. It occupies a single slot for installation and comes with LED indicator lights. It provides electro-optical isolation at 1500V between the input terminals and supports the 1746-SIM Input Simulator.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1746-IN16 is a SLC 500 Digital AC/DC Input Module by Allen-Bradley. It has a 24 Volt AC/DC Signal input voltage category and sixteen (16) inputs with 16 points per common. The 1746-IN16 has operating voltages of 10...30 Volts DC (sinking) and 10...30 Volts AC. Backplane current consumption is 0.085 Amperes at 5 Volts DC and zero (0) Amperes at 24 Volts DC. Maximum DC signal delay is 15 milliseconds for both on and off, and 25 milliseconds for maximum AC signal delay (on and off). The 1746-IN16 has maximum off-state voltages of 3.0 Volts DC and 3.0 Volts AC. Maximum off-state current (AC/DC) is 1 milliampere. Nominal input current is 8 milliamperes at 24 Volts AC/DC. This hardware has an input current of 0.02 Amperes (AC only).
General specifications for the 1746-IN16 include an operating temperature ranging between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit), a non-operating temperature ranging between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit), and an operating humidity between 5% and 95% (non-condensing). Noise immunity for the 1746-IN16 meets NEMA Standard ICS 2-230. This hardware has an operating vibration displacement of 0.015 inches peak at 5…57 Hertz and an acceleration of 2.5 G at 57…2000 Hertz. Operating shock is 30 G for all modules except relay contact and 10 G for relay contact modules (1746-OWx, 1746-OX8, and combination I/O modules). It has an isolation of 1500 Volts and has agency certifications for UL, CSA, CE, and C-Tick; it has a hazardous environment class (Class I, Division 2 Hazardous Environment).
Brand | Allen-Bradley |
Controller Series | SLC 500 |
Operating Voltage | 24 Volts DC |
Type | Digital input Module |
No. of Inputs | 16 |
Operating Temperature | 0 to 60 degrees Celsius |
Non-Operating Temperature | -40 to 85 degrees Celsius |
Operating Humidity | 5% to 95% (non-condensing) |
Isolation | 1500 Volts |
Agency Certifications | UL, CSA, CE, C-Tick |
Question: Does Automation Stop offer repairs on the 1746-IN16?
Answer: Yes. We offer repairs for the 1746-IN16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1746-IN16?
Answer: If you buy the 1746-IN16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1746-IN16 online?
Answer: Yes. Automation Stop sells the 1746-IN16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1746-IN16?
Answer: The 1746-IN16 is made by Allen Bradley - PLC.
Question: What type of product is the 1746-IN16?
Answer: The 1746-IN16 is part of the SLC 500 series.
Question: What kind of Agency Certifications does the 1746-IN16 have?
Answer: The 1746-IN16 includes UL, CSA, CE, C-Tick for its Agency Certifications.
Question: What Brand does the 1746-IN16 have?
Answer: The Rockwell-Automation 1746-IN16 has a Allen Bradley Brand.
Question: What is the Controller Series of the 1746-IN16?
Answer: The Controller Series of the 1746-IN16 is SLC 500.
Question: What is the Isolation of the Rockwell-Automation 1746-IN16?
Answer: The Isolation of the Rockwell-Automation 1746-IN16 is 1500 Volts.
Question: What is the No. of Inputs of the 1746-IN16?
Answer: The 1746-IN16 has a No. of Inputs of 16.
Question: What Non-Operating Temperature does the Allen Bradley Automation 1746-IN16 have?
Answer: The Non-Operating Temperature of the Allen Bradley Automation 1746-IN16 is -40 to 85 degrees Celsius.
Question: What is the Operating Humidity of the 1746-IN16?
Answer: The Operating Humidity of the Allen-Bradley 1746-IN16 is 5% to 95% (non-condensing).
Question: What Operating Temperature does the Allen Bradley Automation 1746-IN16 have?
Answer: The Operating Temperature of the Allen Bradley Automation 1746-IN16 is 0 to 60 degrees Celsius.
Question: What is the Operating Voltage of the 1746-IN16?
Answer: The 1746-IN16 has a Operating Voltage of 24 Volts direct current.
For additional information about 1746-IN16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-IN16.
Revision Part # | Also Known As | Availability |
---|---|---|
1746-IN16/A | 1746-IN16 Ser A, Series A, Rev A | Request a Quote |
1746-IN16/B | 1746-IN16 Ser B, Series B, Rev B | Request a Quote |
1746-IN16/C | 1746-IN16 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.