GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1746-C16

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1746-C16
Series: SLC 500
UPC: 10611320096788

Description:

This Allen-Bradley SLC 500 Chassis Interconnect Cable is a ribbon type cable that is 4ft in length. It connects the chassis to extend the backplane and is used in linking the chassis with one another. It is the longest in any SLC 500 Interconnect Cable. It can connect chassis that is 0.914M and 1.27M in the enclosure and should be given a minimum of 4 inches of clearance from the side of the chassis to give enough space for proper bending of the cable.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1746-C16 is a robust cable that can be used in conjunction with serial logic controllers that belong to the SLC 500 Series to create a communication network within the industrial automation system. This network allows the user to ensure that the components of the system can interact with one another and create an interconnected pool of devices that improve the productivity and efficiency of the automation system. The cable has one slot and can be used with a variety of devices to create channels of communication that can be used during the operation of the system. The cable is highly compact and can be used in a variety of industrial environments to accentuate the communication capabilities of the industrial automation system. The cable has an unbendable shrink wrap applied at its ends to ensure that the design of the cable is equipped with adequate strain relief. This unique design improves the robustness of the cable.

The Allen-Bradley 1746-C16 is a sophisticated cable that can be used on chassis frames of various sizes and types. The cable is used to link one chassis below another in an industrial automation system and provides an element of connectivity to the hardware of the control system. The device is 1.27 meters long and has to be assembled at a minimum distance of 4 inches from the chassis frame to account for the bend radius of the cable in the enclosure. At a rated voltage of 24 volts of direct current, the backplane current of the cable is 85 milliamperes.

Technical Specifications

Brand: Allen-Bradley / Rockwell Automation
Series: SLC 500 Chassis Interconnect Cables
Part Number: 1746-C16
Item Type: Cable
Cable Length: 1.27 m (50 inches)
Chassis Orientation: Links one below the other
Clearance from Chassis: 101.6 mm (4 inches)
Analog Inputs: Thermocouple
Connection Hardware: 1746-RT32
Slots: 1
Operating temperature: 0° to +55°C (+32° to +131°F)
Storage temperature: -25° to +70°C (-13° to +158°F)
Shock (operating): 15 g at 11 ms
Shock (nonoperating): 30 g at 11 ms
Vibration (operating): 2g up to 2000 Hz
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1746-C16?

Answer: Yes. We offer repairs for the 1746-C16 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1746-C16?

Answer: If you buy the 1746-C16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1746-C16 online?

Answer: Yes. Automation Stop sells the 1746-C16 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1746-C16?

Answer: The 1746-C16 is made by Allen Bradley - PLC.


Question: What type of product is the 1746-C16?

Answer: The 1746-C16 is part of the SLC 500 series.


Question: What Analog Inputs: is included with the Rockwell Automation 1746-C16?

Answer: The 1746-C16 has a Thermocouple Analog Inputs:.


Question: What Brand: is included with the 1746-C16?

Answer: The Allen Bradley Automation 1746-C16 has a AB / Rockwell Automation Brand:.


Question: What Cable Length: does the 1746-C16 have?

Answer: The Cable Length: of the Rockwell Automation 1746-C16 is 1.27 m (50 inch).


Question: What Chassis Orientation: does the Rockwell-Automation 1746-C16 have?

Answer: The 1746-C16 has a Links one below the other Chassis Orientation:.


Question: What is the Clearance from Chassis: of the 1746-C16?

Answer: The Clearance from Chassis: of the 1746-C16 is 101.6 mm (4 inch).


Question: What Connection hardware component: does the Allen-Bradley 1746-C16 have?

Answer: The Allen-Bradley 1746-C16 has a Connection hardware component: of 1746-RT32.


Question: What Item Type: does the Rockwell Automation 1746-C16 have?

Answer: The Rockwell Automation 1746-C16 has a Cable Item Type:.


Question: What Operating temperature: does the Allen Bradley/Rockwell Automation 1746-C16 have?

Answer: The Allen Bradley/Rockwell Automation 1746-C16 has a Operating temperature: of 0° to +55°C (+32° to +131°F).


Question: What is the part Number: of the Allen Bradley Automation 1746-C16?

Answer: The part Number: of the Allen Bradley Automation 1746-C16 is 1746-C16.


Question: What is the Series: of the 1746-C16?

Answer: The Rockwell Automation 1746-C16 has a Series: of SLC 500 Chassis Interconnect Cables.


Question: What Shock (nonoperating): does the 1746-C16 have?

Answer: The Shock (nonoperating): of the 1746-C16 is 30 g at 11 ms.


Question: What is the Shock (operating): of the Allen Bradley-Rockwell Automation 1746-C16?

Answer: The Shock (operating): of the 1746-C16 is 15 g at 11 ms.


Question: What is the Slots: of the Allen Bradley-Rockwell Automation 1746-C16?

Answer: The Slots: of the Allen Bradley-Rockwell Automation 1746-C16 is 1.


Question: What is the Storage temperature: of the Allen Bradley 1746-C16?

Answer: The Storage temperature: of the 1746-C16 is -25° to +70°C (-13° to +158°F).


Question: What Vibration (operating): does the Rockwell-Automation 1746-C16 have?

Answer: The Vibration (operating): of the Rockwell-Automation 1746-C16 is 2g up to 2000 Hz.


Series information for 1746-C16

For additional information about 1746-C16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-C16.

Revision Part # Also Known As Availability
1746-C16/A 1746-C16 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1746-C1G
  • 1746-CI6
  • 1746-CIG
  • 174G-C16
  • 174G-C1G
  • 174G-CI6
  • 174G-CIG
  • I746-C16
  • I746-C1G
  • I746-CI6
  • I746-CIG
  • I74G-C16
  • I74G-C1G
  • I74G-CI6
  • I74G-CIG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP