GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1746-BTM |
| Series: | SLC 500 |
Description:
This Allen-Bradley SLC 500 barrel temperature control module accommodates 4 zones of autotuned cool/heat PID loop for temperature control. With a 1000V isolation voltage, it provides 8Hz channel bandwidth. It requires a single slot in an SLC 500 chassis and self-diagnoses and detects open-circuits. It has an analog filter with a low pass digital filter and supports thermocouple type J and K.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 1746-BTM is a Barrel Temperature Control Module for the SLC 500 system. It is an intelligent I/O module that accommodates four (4) zones of autotuned heat/cool PID loops for temperature control applications. Each of its 4 analog inputs functions as the controlled variable (C) for a PID loop. For each of the loops, a tuning-assisted process (TAP) algorithm and a PID algorithm are performed on the module; the manipulated variable (M) output of each loop, either as a numeric value or as a time-proportioned output (TPO) signal is sent from the module to the SLC processor’s data table. A ladder logic can send either the TPO signal to a digital output module or the M numeric value to an analog output module to close the loop. This unit uses a single slot for installation in an SLC 500 chassis and provides self-calibration, auto-tuning of PID loops (optimized for tuning barrel temperature control loops), self-diagnostics and detection of input open-circuit including thermocouple break. It is compatible with all SLC 500 processors except the SLC 5/01 processor.
This module is designed to provide four (4) Proportional-Integral-Derivative (PID) loops. Process Variable (PV) input is wired to any of the module’s four (4) Thermocouple input channels. Supported Thermocouple types of this module are Type J and K thermocouples. The module has configurable and intelligent response when broken sensor input is detected. Configurable responses are disabled loop, force CV to break TC break control value, force CV to manual % output or invalid setting. Decision for the TC break response must be based according to the process’ safe state during errors or Fail-Safe position. Additionally, the Barrel Temperature Control Module support configuration of loop alarm by enabling the appropriate alarm WORD and Bits.
Technical Specifications
| Brand | Allen-Bradley/Rockwell Automation |
| Controller Series | SLC 500 |
| Compatible Processors | SLC 5/02, -5/03, -5/04 and 5/05 |
| Analog Input Type | Thermocouple |
| No. of Inputs | 4 |
| Storage Temperature | -40 to 85° Celsius |
| Operating Temperature | 0 to 60° Celsius |
| Conversion Type | Sigma-Delta modulation |
| Rated Frequency | 50-60 Hertz |
| Weight | 1 Kilogram |
FAQ
Question: Does Automation Stop offer repairs on the 1746-BTM?
Answer: Yes. We offer repairs for the 1746-BTM and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1746-BTM?
Answer: If you buy the 1746-BTM through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1746-BTM online?
Answer: Yes. Automation Stop sells the 1746-BTM online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1746-BTM?
Answer: The 1746-BTM is made by Allen Bradley - PLC.
Question: What type of product is the 1746-BTM?
Answer: The 1746-BTM is part of the SLC 500 series.
Question: What Analog Input Type is included with the 1746-BTM?
Answer: The Allen Bradley 1746-BTM has a Thermocouple Analog Input Type.
Question: What Brand does the 1746-BTM have?
Answer: The 1746-BTM has a AB/Rockwell Automation Brand.
Question: What is the Compatible Processors of the 1746-BTM?
Answer: The Compatible Processors of the Rockwell-Automation 1746-BTM is SLC 5/02, -5/03, -5/04 and 5/05.
Question: What is the Controller Series of the 1746-BTM?
Answer: The Allen Bradley-Rockwell Automation 1746-BTM has a Controller Series of SLC 500.
Question: What Conversion Type is included with the 1746-BTM?
Answer: The Allen Bradley Automation 1746-BTM has a Sigma-Delta modulation Conversion Type.
Question: What is the No. of Inputs of the Allen Bradley Automation 1746-BTM?
Answer: The Allen Bradley Automation 1746-BTM has a No. of Inputs of 4.
Question: What Operating Temperature does the Rockwell-Automation 1746-BTM have?
Answer: The Operating Temperature of the Rockwell-Automation 1746-BTM is 0 to 60° Celsius.
Question: What Rated Frequency does the Rockwell Automation 1746-BTM have?
Answer: The 1746-BTM has a Rated Frequency of 50-60 Hertz.
Question: What is the Storage Temperature of the 1746-BTM?
Answer: The Storage Temperature of the 1746-BTM is -40 to 85° Celsius.
Question: What Weight does the 1746-BTM have?
Answer: The Allen Bradley/Rockwell Automation 1746-BTM has a Weight of 1 Kilogram.
Series information for 1746-BTM
For additional information about 1746-BTM check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-BTM.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1746-BTM/A | 1746-BTM Ser A, Series A, Rev A | Request a Quote |
| 1746-BTM/B | 1746-BTM Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
- 1746-8TM
- 174G-BTM
- 174G-8TM
- I746-BTM
- I746-8TM
- I74G-BTM
- I74G-8TM
