GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1738-AENTR

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1738-AENTR
Series: 1738

Description:

The Allen-Bradley 1738-AENTR is an ArmorPoint I/O 2-Port EtherNet/IP Series A Adapter module. It can support up to 63 modules, 20 direct connections, and 5 rack-optimized connections. The backplane output current limit for this unit is 0.8 Amperes. The input voltage is rated at 24 Volts nominal and the voltage range is between 10 Volts and 28.8 Volts. This adapter has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards.


Key Features:

  • contains 4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters) dimensions

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1738-AENTR is an adapter module by Allen-Bradley. This adapter is able to support up to 63 modules, 20 direct connections, and 5 rack-optimized connections. While the backplane output current limit for this unit is 0.8 Amperes, the limit can be increased using the backplane extension power supply model 1738-EP24DC. The adapter’s input voltage is rated at 24 Volts nominal and the voltage range is between 10 Volts and 28.8 Volts. The inrush current limit for this unit is 6 Amperes for up to 10 milliseconds. The 1738-AENTR features reverse polarity input overvoltage protection. The power consumption for this adapter module is rated at 10.4 Watts at 28.8 Volts. The maximum power dissipation rating is 6.3 Watts at 28.8 Volts. This module’s thermal dissipation at 28.8 Volts is 21.5 BTU per hour. The isolation voltage limit with a basic insulation type is 50 Volts continuous. The allowable field power bus supply voltage ranges from 10 Volts to 28.8 Volts. 24 Volts is the nominal field power bus voltage. The current limit for the field power bus supply is 10 Amperes. The 1738-AENTR has an operating temperature range between -4 degrees and 140 degrees Fahrenheit. The storage or non-operating temperature range is -40 degrees to 185 degrees Fahrenheit. This module needs to be kept in an environment that has relative humidity from 5 percent to 95 percent noncondensing. This device complies with CISPR standards and is certified in Group 1, Class A. The weight of this module is approximately 0.72 pounds (0.33 kilograms). The dimensions are 4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters).

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1738-AENTR?

Answer: Yes. We offer repairs for the 1738-AENTR and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1738-AENTR?

Answer: If you buy the 1738-AENTR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1738-AENTR online?

Answer: Yes. Automation Stop sells the 1738-AENTR online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1738-AENTR?

Answer: The 1738-AENTR is made by Allen Bradley - PLC.


Series information for 1738-AENTR

For additional information about 1738-AENTR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1738-AENTR.

Revision Part # Also Known As Availability
1738-AENTR/A 1738-AENTR Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 173B-AENTR
  • I738-AENTR
  • I73B-AENTR

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP