GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1738-AENT

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1738-AENT
Series: 1738
UPC: 10612598303707

Description:

Product number 1738-AENT is an ArmorPOINT I/O Ethernet/IP adapter module. It was produced by Allen Bradley. This module is equipped with several LED status indicators. It has a maximum power consumption rating of 8.1 watts at 28.8 volts DC. It also has a maximum power dissipation rating of 2.8 watts at 28.8 volts DC. This adapter module can support up to 63 modules. It has physical dimensions that measure 112.0 mm x 72.0 mm x 65.0 mm. Also, this device has an approximate weight of 0.36 kilograms.


Key Features:

  • ships with 4.41 x 2.83 x 2.56 inches (112 x 72 x 65 millimeters) dimensions

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1738-AENT is an ArmorPOINT I/O Ethernet/IP adapter module. This module was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This product can support up to 63 modules with 5 rack-optimized connections, as well as 31 direct connections. The maximum backplane current output for this adapter module is 1 ampere. The maximum inrush current rating of this device is 6 amperes for 10 milliseconds (ms). The Allen Bradley 1738-AENT adapter module has an input voltage rating of 24 volts DC at 500 milliamperes or 12 volts DC at 1.0 ampere. Additionally, the input voltage range of this device is 10 to 28.8 volts DC. This product has a maximum field side power rating of 24 volts DC at 10 amperes. The maximum power dissipation rating of this device is 2.8 watts at 28.8 volts DC, while the maximum thermal dissipation rating is 9.5 BTU/hr at 28.8 volts DC. The 1738-AENT adapter module is equipped with several LED indicators, which include indicators for the adapter status, network status, POINTBus status, network activity, and much more.  

The Allen Bradley 1738-AENT ArmorPOINT I/O Ethernet/IP adapter module should be operated within an environment where the temperature ranges from -20 to 60 degrees Celsius. Additionally, when this device is not being operated, or is being stored, the temperature of the surrounding area should range from -40 to 85 degrees Celsius. The relative humidity ratings suitable for this module range from 5% to 95% non-condensing. This adapter module has physical dimensions that measure approximately 112.0 millimeters x 72.0 millimeters x 65.0 millimeters, or 4.41 inches x 2.83 inches x 2.56 inches (height x width x depth). Additionally, the approximate weight of this module is 0.36 kilograms, or 0.8 pounds. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1738-AENT?

Answer: Yes. We offer repairs for the 1738-AENT and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1738-AENT?

Answer: If you buy the 1738-AENT through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1738-AENT online?

Answer: Yes. Automation Stop sells the 1738-AENT online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1738-AENT?

Answer: The 1738-AENT is made by Allen Bradley - PLC.


Question: What voltage does the Allen Bradley - PLC 1738-AENT have?

Answer: The 1738-AENT has a voltage of 24.


Series information for 1738-AENT

For additional information about 1738-AENT check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1738-AENT.

Revision Part # Also Known As Availability
1738-AENT/A 1738-AENT Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 173B-AENT
  • I738-AENT
  • I73B-AENT

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP