GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1732E-IF4M12R

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1732E-IF4M12R
Series: 1732E
UPC: 10885630215690

Description:

The Allen Bradley 1732E-IF4M12R ArmorBlock module is a 24-volt DC power, dual-port Ethernet/IP 4-point analog input and output module. This module is equipped with 4 LED indicators. The rated voltage range of this module is 12 to 30 volts DC. This device has a rated power consumption of 3 watts at 24 volts DC. The isolation voltage is rated at 50 volts when operating continuously. The physical dimensions of this device measure 179 mm x 37 mm x 27 mm. This module weighs approximately 0.34 kilograms.


Key Features:

  • contains a configurable as voltage or current inputs input type

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This Allen Bradley module, the 1732E-IF4M12R, is an ArmorBlock dual-port Ethernet/IP 4-point analog input and output module with 24 volts of direct current power. This module is equipped with four (4) operating LED indicators. These LED indicators can either be off, red, or green, as well as either being solid or flashing. When the LED indicator is off, this means that the inputs are inactive and must be calibrated, whereas the flashing green shows that the channel is being gauged. Solid green signifies that all processes are normal and that the inputs are being scanned, but when a defect is detected, it starts flashing Red. This module has four inputs with a resolution 16 bits minimum.  The data is in a sixteen (16)-bit sign-magnitude format, with a per-channel conversion rate of 1.005 kilohertz. In addition, each channel has a one (1) kilohertz Notch Filter, and the device features an input current that ranges from zero (0) to twenty (20) milliamperes, along with an input voltage that ranges from zero (0) to ten (10) volts. This ArmorBlock module also includes an input impedance of twenty-five (25) kilo-ohm per channel along with a 0.1 percent full-scale accuracy at twenty-five (25) degrees Celsius. This device also features a constant current voltage of thirty (30) volts and an input overload current that is rated at thirty-two (32) milliamperes. This module includes a peak functioning input voltage rating of thirty (30) volts direct current and the lowest voltage rating being twelve (12) volts direct current. The power rating of the module ranges from twelve (12) to thirty (30) volts at 300 milliamperes, with an average power usage of three (3) watts at twenty-four (2$) volts direct current.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1732E-IF4M12R?

Answer: Yes. We offer repairs for the 1732E-IF4M12R and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1732E-IF4M12R?

Answer: If you buy the 1732E-IF4M12R through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1732E-IF4M12R online?

Answer: Yes. Automation Stop sells the 1732E-IF4M12R online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1732E-IF4M12R?

Answer: The 1732E-IF4M12R is made by Allen Bradley - PLC.


Series information for 1732E-IF4M12R

For additional information about 1732E-IF4M12R check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1732E-IF4M12R.

Revision Part # Also Known As Availability
1732E-IF4M12R/A 1732E-IF4M12R Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1732E-IF4MI2R
  • 1732E-1F4M12R
  • 1732E-1F4MI2R
  • I732E-IF4M12R
  • I732E-IF4MI2R
  • I732E-1F4M12R
  • I732E-1F4MI2R

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP