GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1732E-16CFGM12QCR |
Series: | 1732E |
UPC: | 10885630057207 |
Description:
The Allen-Bradley 1732E-16CFGM12QCR 2-port, self-configurable module is an Ethernet module. The module features 16 sink inputs and 16 source outputs. The maximum off-state input voltage of this device is rated at 5 volts DC, with a peak on-state input voltage of 30 volts DC. This module has a sensor source voltage range of 10 to 30 volts DC. The maximum sensor source current per module is 800 milliamperes. The physical dimensions of this device measure 7.87 inches x 2.38 inches x 1.77 inches. Additionally, the weight of this module is approximately 0.43 kilograms.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1732E-16CFGM12QCR, which was designed and produced by Allen-Bradley and has sixteen (16) channels with a twenty-four (24) volts direct current (DC) voltage, is a self-configurable digital I/O dual port Ethernet module. Furthermore, this Allen Bradley module has an available memory of six (6) KB. This module has sixteen (16), twenty-four (24) volts sink type inputs and sixteen (16), twenty-four (24) volts source type outputs. The module has a maximum off-state input voltage of five (5) volts direct current (DC) and a peak on-state input voltage of thirty (30) volts direct current (DC). The maximum input off-state current is 1.5 milliamperes at five (5) volts direct current (DC) with maximum input on-state current of five (5) milliamperes at thirty (30) volts direct current (DC). The maximum sensor source voltage is thirty (30) volts direct current (DC) and the minimum sensor source voltage is ten (10) volts direct current (DC). Furthermore, the maximum sensor source current per module is eight hundred (800) milliamperes, and this module supports a dual D-code M12 network connector and an auxiliary power connector of dual four pin mini. This module by Allen Bradley has an enclosure with an IP rating of IP65, IP66, IP67, and IP69 K. This device also has an operating temperature range of negative twenty (-20) to sixty (60) degrees Celsius and a storage temperature range of negative forty (-40) to eighty-five (85) degrees Celsius. The vibration rating for this module is 5 G at ten (10) to five hundred (500) hertz. This device has an operating and non-operating shock ratings of 30 G and 50 G, respectively.
Question: Does Automation Stop offer repairs on the 1732E-16CFGM12QCR?
Answer: Yes. We offer repairs for the 1732E-16CFGM12QCR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1732E-16CFGM12QCR?
Answer: If you buy the 1732E-16CFGM12QCR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1732E-16CFGM12QCR online?
Answer: Yes. Automation Stop sells the 1732E-16CFGM12QCR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1732E-16CFGM12QCR?
Answer: The 1732E-16CFGM12QCR is made by Allen Bradley - PLC.
For additional information about 1732E-16CFGM12QCR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1732E-16CFGM12QCR.
Revision Part # | Also Known As | Availability |
---|---|---|
1732E-16CFGM12QCR/A | 1732E-16CFGM12QCR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.