GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1732E-12X4M12QCDR

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1732E-12X4M12QCDR
Series: 1732E

Description:

The Allen Bradley 1732E-12X4M12QCDR is a 12-input and 4 output dual port Ethernet/IP and diagnostics I/O block device. This device has a 4-pin mini auxiliary power connector. The auxiliary and input voltage for the on-state are 12 to 30 volts DC with an output current of 2 amperes per block. The voltage for sensor source is 10 to 30 volts DC. The leakage output during the off-state is 0.5 milliamperes, with a voltage drop of 0.5 volts during the on-state.


Key Features:

  • has ip65/66/67/69k (type 4x for indoor use) enclosure
  • has 200 x 60.4 x 45 millimeters (7.87 x 2.38 x 1.77 inches) dimensions

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1732E-12X4M12QCDR is an Allen Bradley I/O block with digital DC combinations. These I/O combination blocks have two (2) Ethernet/IP ports for communication with 12 inputs with sensor sources diagnostically in a sink. The number of outputs are 4 with diagnostics in a source. The continuous output current is 0.5 amperes per point and 2.0 amperes per block. The surge or inrush output current is 1.2 amperes for 10 milliseconds per point and it is repeatable every 2 seconds. The sensor source current is 50 milliamperes per point at 30 volts DC (direct current). The auxiliary current is 2.0 amperes per block at maximum. There is a daisy chain support for the auxiliary power. There are eight (8) M12 I/O connectors. The voltage input or off-state range is 0 to 5 volts with on-state range of 12 to 30 volts DC. The current input off-state is 0 to 1.5 milliamperes while the on-state is 2 to 5 milliamperes. The voltage sensor source ranges from 10 to 30 volts DC. There are four (4) digital outputs electronically fused per point. The voltage drop output in on-state is 0.5 volts DC and voltage blocking off-peak is 30 volts DC. The current on-state output is 1 to 500 milliamperes with an off-state current leakage of 0.5 milliamperes. The auxiliary power voltage is 12 to 30 volts DC with 2-ampere current. The wiring includes one (1) power port, one (1) signal port, and one (1) communication port. The indicators are as follows: module status as red/green, network status as red/green, link status as green/yellow, auxiliary power as green, and I/O status as yellow/red. The operating temperature is -20 to +60 degrees Celsius with non-operating temperature of -40 to +85 degrees Celsius.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1732E-12X4M12QCDR?

Answer: Yes. We offer repairs for the 1732E-12X4M12QCDR and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1732E-12X4M12QCDR?

Answer: If you buy the 1732E-12X4M12QCDR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1732E-12X4M12QCDR online?

Answer: Yes. Automation Stop sells the 1732E-12X4M12QCDR online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1732E-12X4M12QCDR?

Answer: The 1732E-12X4M12QCDR is made by Allen Bradley - PLC.


Series information for 1732E-12X4M12QCDR

For additional information about 1732E-12X4M12QCDR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1732E-12X4M12QCDR.

Revision Part # Also Known As Availability
1732E-12X4M12QCDR/A 1732E-12X4M12QCDR Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1732E-12X4MI2QCDR
  • 1732E-I2X4M12QCDR
  • 1732E-I2X4MI2QCDR
  • I732E-12X4M12QCDR
  • I732E-12X4MI2QCDR
  • I732E-I2X4M12QCDR
  • I732E-I2X4MI2QCDR

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP