GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1732D-16CFGM12M12 |
Series: | 1732D |
UPC: | 10612598323040 |
Description:
The Allen-Bradley 1732D-16CFGM12M12 is a DeviceNet Digital I/O module. It has 16 available inputs. The sensor source voltage range is 11 Volts to 30 Volts. The maximum auxiliary input current is rated at 900 milliamperes and the input voltage range for the auxiliary supply is 12 Volts to 30 Volts. The current sensor source per input is limited to 50 milliamperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1732D-16CFGM12M12 is a DeviceNet Digital I/O module by Allen-Bradley. This module has 16 available inputs with an input type of 61131-2 Type 3. The off-state input voltage of this module is 5 Volts DC. The minimum on-state input voltage is 11 volts and the maximum on-state input voltage is 30 Volts. The minimum sensor source voltage is 11 Volts for this unit and the maximum is 30 Volts. Auxiliary power is also available with this module. The maximum auxiliary input current is rated at 900 milliamperes and the maximum input voltage for the auxiliary supply is 30 Volts. The minimum auxiliary voltage is 12 Volts. The current sensor source per input is limited to 50 milliamperes. The input delay times for ON to OFF as well as OFF to ON are in the range of 0 to 16,000 milliseconds. The module is rated for operation in a temperature range that lies between -20 degrees and 60 degrees Celsius (-4 degrees to 140 degrees Fahrenheit). The manufacturer recommended storage temperature is in the range of -45 degrees to 85 degrees Celsius (-49 degrees to 185 degrees Fahrenheit). The environmental relative humidity rating that is suitable for the 1732D-16CFGM12M12 is between 5 percent and 95 percent non-condensing. This module has been built to be able to withstand an operational vibration of up to 5 G at a frequency of 10 to 500 Hertz. It is rated for an operational shock of up to 30 G and a non-operational shock rating of 50 G. The module is classified in Group 1, Class A for emission control.
Question: Does Automation Stop offer repairs on the 1732D-16CFGM12M12?
Answer: Yes. We offer repairs for the 1732D-16CFGM12M12 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1732D-16CFGM12M12?
Answer: If you buy the 1732D-16CFGM12M12 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1732D-16CFGM12M12 online?
Answer: Yes. Automation Stop sells the 1732D-16CFGM12M12 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1732D-16CFGM12M12?
Answer: The 1732D-16CFGM12M12 is made by Allen Bradley - PLC.
For additional information about 1732D-16CFGM12M12 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1732D-16CFGM12M12.
Revision Part # | Also Known As | Availability |
---|---|---|
1732D-16CFGM12M12/A | 1732D-16CFGM12M12 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.