GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1715-AENTR |
Series: | 1715 Redundant I/O |
Description:
This 1715-AENTR Ethernet adapter module supports the Device Level Ring by its dual Ethernet communication port. It has an autosensing feature and serves as a proxy module to all Ethernet/IP messages that are delivered in and out of the redundant I/O modules.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 1715-AENTR is an Ethernet adapter module by Allen-Bradley that supports Device Level Ring or start topologies through its dual Ethernet communication port with autosensing ability. It is an Ethernet adapter module for the 1715 redundant I/O system that serves as a proxy module to all Ethernet I/P messages that are sent in and out of the redundant I/O modules. It is specifically designed for the ControlLogix family of Programmable Automation Controllers (PACs). The process uptime increases by implementing redundant I/O system and redundant communication network and reduces the risk of an unwanted system downtime. In simplex mode, a redundant Ethernet network is achieved. The failure of the single adapter module disrupts the entire communication network. The system availability can be increased by using the module in a duplex mode where the failure of one of the 2 modules will not impact the communication network.
The 1715-AENTR system does not need cross cabling of I/O’s, as switching of active I/O module is done through the smart sensing and detection of the 1715 backplane. The location of the module is the leftmost part of the 1715 rack. This 1715-AENTR is an Ethernet/IP adapter module that belongs to the 1715 redundant I/O systems of Allen-Bradley. The 1715 redundant I/O platform is known for its exceptional hassle-free use and programming-free operation. The module can be applied for standard or extreme environment functions and offers assistance for critical applications. The modules are adaptable and offer support for application configuration, such as those that are classified as non-safety or as simplex or duplex modules.
Bulletin | 1715 |
Product Type | Redundant I/O System |
Weight (Appx.) | 420 grams (14.82 ounces) |
Dimensions | 224 x 84 x 30 millimeters (8.82 x 3.31 x 1.18 inches) |
Operating Voltage Range | 380 milliamperes at 18…32 Volts DC |
Isolation Voltage | 50 Volts (continuous) with Basic Insulation Type |
Fuse Type | 4 Ampere, 125 Volt, Type T |
Enclosure Type Rating | Open-Style |
Operating Temperature | -25 to 60 degrees Celsius |
Surrounding Air Temperature (max.) | 60 degrees Celsius |
Relative Humidity | 5% to 95% (non-condensing) |
Brand | Allen-Bradley |
Manufacturer | Rockwell Automation |
Communication Module | Ethernet/IP Adapter |
Type of Module | Ethernet/IP Adapter |
Modules Supported | 24 per Adapter Pair |
Wire Size | 12 AWG |
Power Dissipation | 8 Watts |
Weight | 420 grams |
Rail Mounting Possible | Yes |
Voltage Type of Supply Voltage | DC |
Wall Mounting | Yes |
Wire Type | Shielded |
Question: Does Automation Stop offer repairs on the 1715-AENTR?
Answer: Yes. We offer repairs for the 1715-AENTR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1715-AENTR?
Answer: If you buy the 1715-AENTR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1715-AENTR online?
Answer: Yes. Automation Stop sells the 1715-AENTR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1715-AENTR?
Answer: The 1715-AENTR is made by Allen Bradley - PLC.
Question: What type of product is the 1715-AENTR?
Answer: The 1715-AENTR is part of the 1715 Redundant I/O series.
Question: What Brand is included with the Rockwell Automation 1715-AENTR?
Answer: The Rockwell Automation 1715-AENTR has a Allen Bradley Brand.
Question: What Bulletin does the 1715-AENTR have?
Answer: The Bulletin of the 1715-AENTR is 1715.
Question: What Communication Module is included with the Allen-Bradley 1715-AENTR?
Answer: The 1715-AENTR has a Ethernet/IP Adapter Communication Module.
Question: What Dimensions does the Rockwell Automation 1715-AENTR have?
Answer: The Dimensions of the 1715-AENTR is 224 x 84 x 30 millimeters (8.82 x 3.31 x 1.18 inch).
Question: What Enclosure Type Rating is included with the Allen Bradley-Rockwell Automation 1715-AENTR?
Answer: The Allen Bradley-Rockwell Automation 1715-AENTR has a Open-Style Enclosure Type Rating.
Question: What Fuse Type does the 1715-AENTR have?
Answer: The Rockwell-Automation 1715-AENTR has a Fuse Type of 4 Ampere, 125 Volt, Type T.
Question: What is the Isolation Voltage of the Allen Bradley-Rockwell Automation 1715-AENTR?
Answer: The 1715-AENTR has a Isolation Voltage of 50 Volts (continuous) with Basic Insulation Type.
Question: What Modules Supported does the 1715-AENTR have?
Answer: The Rockwell Automation 1715-AENTR has a Modules Supported of 24 per Adapter Pair.
Question: What is the Operating Temperature of the 1715-AENTR?
Answer: The Operating Temperature of the Allen Bradley/Rockwell Automation 1715-AENTR is -25 to 60 degrees Celsius.
Question: What is the Operating Voltage Range of the Allen-Bradley 1715-AENTR?
Answer: The Operating Voltage Range of the Allen-Bradley 1715-AENTR is 380 milliamperes at 18…32 Volts direct current (DC).
Question: What Power Dissipation does the Rockwell Automation 1715-AENTR have?
Answer: The Rockwell Automation 1715-AENTR has a Power Dissipation of 8 Watts.
Question: What Product Type does the Allen-Bradley 1715-AENTR have?
Answer: The Allen-Bradley 1715-AENTR has a Redundant input/output System Product Type.
Question: Does the Allen Bradley 1715-AENTR have a Rail Mounting Possible?
Answer: Yes.
Question: What is the Relative Humidity of the 1715-AENTR?
Answer: The Rockwell-Automation 1715-AENTR has a Relative Humidity of 5% to 95% (non-condensing).
Question: What is the Surrounding Air Temperature (max.) of the 1715-AENTR?
Answer: The 1715-AENTR has a Surrounding Air Temperature (max.) of 60 degrees Celsius.
Question: What Type of Module does the 1715-AENTR have?
Answer: The 1715-AENTR has a Ethernet/IP Adapter Type of Module.
Question: What Voltage Type of Supply Voltage does the Rockwell-Automation 1715-AENTR have?
Answer: The Rockwell-Automation 1715-AENTR has a DC Voltage Type of Supply Voltage.
Question: Does the Allen Bradley/Rockwell Automation 1715-AENTR have a Wall Mounting?
Answer: Yes.
Question: What is the Weight of the Rockwell Automation 1715-AENTR?
Answer: The 1715-AENTR has a Weight of 420 grams.
Question: What is the Weight (Appx.) of the 1715-AENTR?
Answer: The Allen Bradley-Rockwell Automation 1715-AENTR has a Weight (Appx.) of 420 grams (14.82 ounces).
Question: What is the Wire Size of the 1715-AENTR?
Answer: The Allen Bradley-Rockwell Automation 1715-AENTR has a Wire Size of 12 AWG.
Question: What Wire Type is included with the 1715-AENTR?
Answer: The Allen Bradley-Rockwell Automation 1715-AENTR has a Shielded Wire Type.
For additional information about 1715-AENTR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1715-AENTR.
Revision Part # | Also Known As | Availability |
---|---|---|
1715-AENTR/A | 1715-AENTR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.