GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AB-B515G-S2L |
Series: | 1326 Motors |
Description:
The 1326AB-B515G-S2L synchronous motor from Allen Bradley belongs to the Bulletin 1326 series. It is widely used with other products from the same manufacturer. This three-phase AC motor is a permanent magnet servo motor. The magnets reduce operating friction and are made of ferrite. The maximum speed of operation of this motor is 5000 rpm with a 460-volt input voltage. It is capable of generating an output power rated at 2.9 kilowatts.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1326AB-B515G-S2L is designed and manufactured by Allen Bradley, and it belongs to the Torque Plus series of servo motors. This family of servo motors are equipped with multiples features. Among the features of this series is increased torque rating and reduced length. This servo motor requires a three-phase AC source. The 1326AB-B515G-S2L is brushless and gives a stable and efficient performance in different applications. It can easily be integrated with different systems. The Torque Plus series of motors either have standard-resolution or high-resolution encoder feedback. The motors are rugged, sturdy, and can withstand different environmental conditions. The precise feedback is another very important feature of the device. This resolver eliminates the need of many other components. These are available in single and multi-turn configuration. These motors are perfect for applications in which precise motor control is required. The 1326AB-B515G-S2L servo motor has a frame that measures 149 mm. The maximum speed of 1326AB-B515G-S2L is 5000 rpm at a voltage of 460 volts. At 380 volts, however, the speed is 4000 rpm. The input frequency range of this AC motor is from 50 to 60 hertz. The 1326AB-B515G-S2L has a rated torque and system continuous torque of 10.4 Nm. The output power is 2.9 kilowatts. The value of system peak stall torque is 31.2 Nm. The housing of this motor is built from aluminum, which is very helpful in heat transfer. The enclosure is IP65 rated and meets international criteria. This motor can easily be mounted vertically at any angle. The installation guideline is available and should be followed for optimum performance.
Manufacturer | Allen Bradley |
Series | 460V Torque Plus Series |
Product Type | Ferrite AC Servo Motor |
Frame Series | 149 mm frame diameter (165 mm bolt center) |
Motor magnet stack length | 15mm |
Rated Speed | 460V 5000 rpm/380V 4000 rpm |
Feedbacks | Single-turn high-resolution feedback |
Standard Options | IP67 environmental rating only for all frame series |
MPN | 1326AB-B515G-S2L |
Question: Does Automation Stop offer repairs on the 1326AB-B515G-S2L?
Answer: Yes. We offer repairs for the 1326AB-B515G-S2L and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B515G-S2L?
Answer: If you buy the 1326AB-B515G-S2L through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AB-B515G-S2L online?
Answer: Yes. Automation Stop sells the 1326AB-B515G-S2L online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AB-B515G-S2L?
Answer: The 1326AB-B515G-S2L is made by Allen Bradley - Motors.
Question: What type of product is the 1326AB-B515G-S2L?
Answer: The 1326AB-B515G-S2L is part of the 1326 Motors series.
Question: What Feedbacks are included with the Rockwell Automation 1326AB-B515G-S2L?
Answer: The Rockwell Automation 1326AB-B515G-S2L has Feedbacks Single-turn high-resolution feedback.
Question: What Frame Series does the Allen Bradley Automation 1326AB-B515G-S2L have?
Answer: The Frame Series of the Allen Bradley Automation 1326AB-B515G-S2L is 149 mm frame diameter (165 mm bolt center).
Question: What is the Motor magnet stack length of the Allen Bradley/Rockwell Automation 1326AB-B515G-S2L?
Answer: The 1326AB-B515G-S2L has a Motor magnet stack length of 15mm.
Question: What Product Type does the Allen Bradley Automation 1326AB-B515G-S2L have?
Answer: The 1326AB-B515G-S2L has a Ferrite AC (alternating current) Servo Motor Product Type.
Question: What is the Rated Speed of the 1326AB-B515G-S2L?
Answer: The Rated Speed of the 1326AB-B515G-S2L is 460 volts 5000 revolutions per minute (RPM)/460 volts 4000 revolutions per minute (RPM).
Question: What is the Standard Options of the Allen Bradley 1326AB-B515G-S2L?
Answer: The Allen Bradley 1326AB-B515G-S2L has a Standard Options of IP67 environmental rating only for all frame series.
For additional information about 1326AB-B515G-S2L check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B515G-S2L.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AB-B515G-S2L/A | 1326AB-B515G-S2L Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.