GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AB-B515G-M2K5L |
Series: | 1326AB |
Description:
The 1326AB-B515G-M2K5L is a 460V Torque Plus Serie Ferrite AC Servo Motor that is branded and manufactured by Allen-Bradley / Rockwell Automation and has ip 65 enclosure type. It has voltage of 380-460 volts ac. It also comes with multi-turn high resolution encoder feedback. This particular component has been discontinued/obsolete.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Manufacturer | Allen Bradley |
Series | 460V Torque Plus Series |
Product Type | Ferrite AC Servo Motor |
Frame Series | 149 mm frame diameter (165 mm bolt center) |
Motor magnet stack length | 15mm |
Rated Speed | 460V 5000 rpm/380V 4000 rpm |
Feedbacks | Multi-turn high-resolution feedback |
Standard Options | 13.6 N-m (120 lb-in.) Holding brake with 24V DC coil for 1326AB-B5 frame series with IP67 environmental rating |
MPN | 1326AB-B515G-M2K5L |
Question: Does Automation Stop offer repairs on the 1326AB-B515G-M2K5L?
Answer: Yes. We offer repairs for the 1326AB-B515G-M2K5L and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B515G-M2K5L?
Answer: If you buy the 1326AB-B515G-M2K5L through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AB-B515G-M2K5L online?
Answer: Yes. Automation Stop sells the 1326AB-B515G-M2K5L online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AB-B515G-M2K5L?
Answer: The 1326AB-B515G-M2K5L is made by Allen Bradley - Motors.
Question: What Feedbacks are included with the Allen Bradley-Rockwell Automation 1326AB-B515G-M2K5L?
Answer: The Allen Bradley-Rockwell Automation 1326AB-B515G-M2K5L includes Multi-turn high-resolution feedback for its Feedbacks.
Question: What Frame Series does the 1326AB-B515G-M2K5L have?
Answer: The Frame Series of the Allen-Bradley 1326AB-B515G-M2K5L is 149 mm frame diameter (165 mm bolt center).
Question: What is the Motor magnet stack length of the 1326AB-B515G-M2K5L?
Answer: The Rockwell-Automation 1326AB-B515G-M2K5L has a Motor magnet stack length of 15mm.
Question: What Product Type does the 1326AB-B515G-M2K5L have?
Answer: The 1326AB-B515G-M2K5L has a Ferrite alternating current (AC) Servo Motor Product Type.
Question: What Rated Speed does the 1326AB-B515G-M2K5L have?
Answer: The Rated Speed of the 1326AB-B515G-M2K5L is 460 volts 5000 revolutions per minute (RPM)/460 volts 4000 revolutions per minute (RPM).
Question: What is the Standard Options of the 1326AB-B515G-M2K5L?
Answer: The 1326AB-B515G-M2K5L has a Standard Options of 13.6 N-m (120 lb-in.) Holding brake with 24 volts direct current (DC) coil for 1326AB-B5 frame series with IP67 environmental rating.
For additional information about 1326AB-B515G-M2K5L check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B515G-M2K5L.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AB-B515G-M2K5L/A | 1326AB-B515G-M2K5L Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.