GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711PC-T6C20D |
Series: | PV Plus 6 Compact |
UPC: | 10612598766076 |
Description:
An operator terminal by Allen-Bradley, the 2711PC-T6C20D is essentially part of the Panel View plus terminal series. It has one USB-port and one port for ethernet connection. The ethernet port can handle a transmission rate of 10 to 100 Mbps. It also incorporates a thin film transistor screen for the purpose of graphical interfacing. This screen is 6 inches in size and it features a resolution of 320 by 240 pixels.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 2711PC-T6C20D is an operator terminal with a graphic interface. This terminal hails from the group of compact operator terminals known as the PanelView Plus terminals. It comes with one USB port and one Ethernet port that supports a 10-100 Mbps rate of transmission, a terminal for power input, and a compact flash type one card-slot integrated into the back panel of this terminal. For graphic interfacing, this Allen-Bradley operator terminal has a 6-inch thin film transistor touchscreen display that features a resolution of 320 x 240. The status of applications is displayed on this screen and users can manage applications through the HMI. A total of no more than 25 displays along with 200 messages are configurable on the 2711PC-T6C20D terminal. it weighs 1.74 pounds, and it is 6 x 7.28 x 3.86 in dimensions. The rated input power of this terminal is 18 to 30 volts direct current, and the random access memory is 256 megabytes.
Furthermore, this Allen-Bradley device supports no more than one connection to a controller when the RSlinx enterprise or KEPserver enterprise is utilized. For communication, this terminal features one Ethernet port and a RS 232 port, and it supports connection to external devices. DF1 & DH-485 system protocols are also supported through the RS 232 port and Ethernet I/P using the Ethernet interface. It also features a built-in PDF viewer to view documents. National Electric Manufacturers Association, Underwriter Laboratories, as well IP-rated type enclosures are supported by this device for panel mounting.
Question: Does Automation Stop offer repairs on the 2711PC-T6C20D?
Answer: Yes. We offer repairs for the 2711PC-T6C20D and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711PC-T6C20D?
Answer: If you buy the 2711PC-T6C20D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711PC-T6C20D online?
Answer: Yes. Automation Stop sells the 2711PC-T6C20D online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711PC-T6C20D?
Answer: The 2711PC-T6C20D is made by Allen Bradley - HMI.
Question: What type of product is the 2711PC-T6C20D?
Answer: The 2711PC-T6C20D is part of the PV Plus 6 Compact series.
For additional information about 2711PC-T6C20D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711PC-T6C20D.
Revision Part # | Also Known As | Availability |
---|---|---|
2711PC-T6C20D/A | 2711PC-T6C20D Ser A, Series A, Rev A | Request a Quote |
2711PC-T6C20D/B | 2711PC-T6C20D Ser B, Series B, Rev B | Request a Quote |
2711PC-T6C20D/C | 2711PC-T6C20D Ser C, Series C, Rev C | Request a Quote |
2711PC-T6C20D/D | 2711PC-T6C20D Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.