GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-T7C4A2

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-T7C4A2
Series: PV Plus 700

Description:

Allen-Bradley?s 2711P-T7C4A2 is a PanelView Plus 6 - 700 operator terminal. This device is equipped with embedded Ethernet and RS-232 communication ports, as well as universal serial bus (USB) ports. This device is powered by an AC power source. Part number 2711P-T7C4A2 sports a 6.5-inch color display, 512 megabytes DDR2 RAM, 512 megabytes of non-volatile storage, with approximately 79 megabytes of free user memory. The operating voltage range of this terminal is 85 to 264 volts AC.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part Number 2711P-T7C4A2 is a color touchscreen operator interface terminal unit designed and manufactured by Allen-Bradley / Rockwell Automation. This device belongs to the PanelView Plus 6 - 700 series of operator terminals. Powered by an isolated direct current (DC) voltage or alternatively alternating current (AC) voltage, this device is fitted with two (2) type 2.0 high speed USB-A ports, one (1) secure digital high-capacity slot which supports 1784-SDx cards, one (1) 3.3 to 5 volts 32-bit PCI slot, one (1) 10/100 megabyte-per-second Auto MDI/MDI-X Ethernet port, one (1) DB9 interface, as well as add-on communication modules for ControlNet, DH+ and DH-485.

The 2711P-T7C4A2 has an open architecture. Additionally, this PanelView Plus 6 operator terminal unit is fitted with dot Net Compact framework version 3.5 and has FAT file system support together with its embedded Datalight reliance file system. This device operates at voltage range of eighty-five (85) to two hundred and sixty-four (264) volts alternating current (AC). This operator terminal weighs approximately eight (8) pounds and has physical dimensions that measure 14 inches by 11 inches by 8 inches (width x height x depth). This unit provides the option of replacing the internal backlight with part number 2711P-RL7C. Additionally, it supports real time input / output messaging and exchange of messages. For communication purposes, this terminal is equipped with an Ethernet port, as well as an RS-232 serial port. The internal memory of this device consists of 512 megabytes (MB) of random-access memory (RAM) and 512 megabytes (MB) of nonvolatile flash memory. 

Technical Specifications

MPN 2711P-T7C4A2
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 700
Input Type Touch
Display Type Color
Display Size 6.5 in
Resolution 640 x 480
Power AC
PCI Max 5 W
Battery Life 4 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 240 BTU/hr
Backlight CCFL 50,000 hours life, min.
Communication Ethernet, RS-232 & (2) USB
Logic Module 128 MB
External CompactFlash Storage 512 MB max
Input Voltage 85...264V AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-T7C4A2?

Answer: Yes. We offer repairs for the 2711P-T7C4A2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T7C4A2?

Answer: If you buy the 2711P-T7C4A2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-T7C4A2 online?

Answer: Yes. Automation Stop sells the 2711P-T7C4A2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-T7C4A2?

Answer: The 2711P-T7C4A2 is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-T7C4A2?

Answer: The 2711P-T7C4A2 is part of the PV Plus 700 series.


Question: What Backlight does the Allen Bradley 2711P-T7C4A2 have?

Answer: The Backlight of the 2711P-T7C4A2 is CCFL 50,000 hours life, min..


Question: What Battery Life does the Allen Bradley Automation 2711P-T7C4A2 have?

Answer: The Battery Life of the Allen Bradley Automation 2711P-T7C4A2 is 4 years min. at 25 °C (77 °F).


Question: What Clock does the Allen Bradley/Rockwell Automation 2711P-T7C4A2 have?

Answer: The Allen Bradley/Rockwell Automation 2711P-T7C4A2 has a Clock of Battery-backed, +/-2 minutes per month.


Question: What Communication does the 2711P-T7C4A2 have?

Answer: The Allen Bradley Automation 2711P-T7C4A2 has a Communication of Ethernet, RS-232 & (2) USB.


Question: What Display Size does the Rockwell Automation 2711P-T7C4A2 have?

Answer: The 2711P-T7C4A2 has a Display Size of 6.5 in.


Question: What Display Type does the 2711P-T7C4A2 have?

Answer: The Allen Bradley-Rockwell Automation 2711P-T7C4A2 has a color Display Type.


Question: What External CompactFlash Storage does the Allen Bradley 2711P-T7C4A2 have?

Answer: The Allen Bradley 2711P-T7C4A2 has a External CompactFlash Storage of 512 MB max.


Question: What is the Heat Dissipation of the 2711P-T7C4A2?

Answer: The 2711P-T7C4A2 has a Heat Dissipation of 240 BTU/hr.


Question: What Input Type does the 2711P-T7C4A2 have?

Answer: The 2711P-T7C4A2 has a Touch Input Type.


Question: What is the Input Voltage of the 2711P-T7C4A2?

Answer: The Input Voltage of the Allen Bradley-Rockwell Automation 2711P-T7C4A2 is 85...264 volts alternating current (AC).


Question: What Logic Module does the Allen Bradley/Rockwell Automation 2711P-T7C4A2 have?

Answer: The Logic Module of the Allen Bradley/Rockwell Automation 2711P-T7C4A2 is 128 MB.


Question: What is the Operating Temperature of the 2711P-T7C4A2?

Answer: The 2711P-T7C4A2 has a Operating Temperature of 0...55 °C (32...131 °F).


Question: What PCI Max does the Allen Bradley 2711P-T7C4A2 have?

Answer: The Allen Bradley 2711P-T7C4A2 has a PCI Max of 5 W.


Question: What Power does the 2711P-T7C4A2 have?

Answer: The 2711P-T7C4A2 has a alternating current (AC) Power.


Question: What is the Resolution of the 2711P-T7C4A2?

Answer: The 2711P-T7C4A2 has a Resolution of 640 x 480.


Series information for 2711P-T7C4A2

For additional information about 2711P-T7C4A2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T7C4A2.

Revision Part # Also Known As Availability
2711P-T7C4A2/A 2711P-T7C4A2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 271IP-T7C4A2
  • 27I1P-T7C4A2
  • 27IIP-T7C4A2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP