GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-RP6 |
Series: | Logic Modules |
Description:
The Rockwell Automation 2711P-RP6 Logic Module has 128 Megabytes of flash memory, 128 Megabytes of RAM memory, and a DC input. It also contains an Ethernet Port, Serial Port, 2 USB ports, and CompactFlash Card Slot.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2711P-RP6 logic module is a logic module with 128 Megabytes of flash storage and 128 Megabytes of RAM. The module is developed by Rockwell Automation and it is part of the PanelView Plus CE family of logic modules. It runs with DC power and it is a Series F device. The module is certified with an IP65 protection rating. It is resistant to water sprays and splashes. For internal connectivity, the module is equipped with a DF1 Ethernet/IP port. The 2711P-RP6 logic module has been certified with both the IEC 60068-2-27 and the IEC 60068-2-6 shock and vibration ratings. The module can be operated in a temperature ranging between 0 and 55 degrees Celsius. No conformal coating is applied on the outer surface of the module, but the module is equipped with multiple peripheral I/O interfaces. It comes with 1 USB 2.0 port and 2 USB host ports.
The 2711P-RP6 logic module is equipped with a CompactFlash card slot. The module has been marine-certified and it can be used in harsh environmental conditions. The module comes with file viewers which can read documents. This module is used with different operator interface devices. It is mainly used for monitoring and controlling devices connected with the ControlLogix 5570 and the CompactLogix 5370 systems. The installation of the module should be done in an environment free from EMC noise. The presence of EMC noise may degrade the performance of the module. The module should not be operated anywhere with a temperature beyond the maximum temperature range specified by the manufacturer. The 2711P-RP6 logic module can be mounted in different locations, but make sure that there is adequate space around the mounting area before mounting the module.
Brand | Allen Bradley |
Type | Logic Module |
Series | PanelView Plus |
Flash Memomry | 128 MB |
RAM | 128 MB |
Storage Temperature | minus 40° C to 85°C |
Operating Temperature | 0 to 60 deg C |
Input Voltage | 24 VDC |
Rated Frequency | 50-60 Hz |
Weight | 860 Grams |
Question: Does Automation Stop offer repairs on the 2711P-RP6?
Answer: Yes. We offer repairs for the 2711P-RP6 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-RP6?
Answer: If you buy the 2711P-RP6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-RP6 online?
Answer: Yes. Automation Stop sells the 2711P-RP6 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-RP6?
Answer: The 2711P-RP6 is made by Allen Bradley - HMI.
Question: What type of product is the 2711P-RP6?
Answer: The 2711P-RP6 is part of the Logic Modules series.
Question: What Brand is included with the 2711P-RP6?
Answer: The Allen Bradley 2711P-RP6 has a Allen Bradley Brand.
Question: What is the Flash Memomry of the 2711P-RP6?
Answer: The Allen Bradley 2711P-RP6 has a Flash Memomry of 128 MB.
Question: What Input Voltage does the Rockwell-Automation 2711P-RP6 have?
Answer: The Input Voltage of the 2711P-RP6 is 24 VDC.
Question: What Operating Temperature does the Rockwell-Automation 2711P-RP6 have?
Answer: The 2711P-RP6 has a Operating Temperature of 0 to 60 deg C.
Question: What is the RAM (random-access random-access memory (RAM)) of the 2711P-RP6?
Answer: The RAM (random-access random-access memory (RAM)) of the 2711P-RP6 is 128 MB.
Question: What Rated Frequency does the 2711P-RP6 have?
Answer: The Rated Frequency of the Rockwell-Automation 2711P-RP6 is 50-60 Hz.
Question: What Storage Temperature does the Allen Bradley/Rockwell Automation 2711P-RP6 have?
Answer: The Storage Temperature of the 2711P-RP6 is minus 40° C to 85°C.
Question: What Weight does the Allen Bradley 2711P-RP6 have?
Answer: The Weight of the Allen Bradley 2711P-RP6 is 860 Grams.
For additional information about 2711P-RP6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-RP6.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-RP6/A | 2711P-RP6 Ser A, Series A, Rev A | Request a Quote |
2711P-RP6/B | 2711P-RP6 Ser B, Series B, Rev B | Request a Quote |
2711P-RP6/C | 2711P-RP6 Ser C, Series C, Rev C | Request a Quote |
2711P-RP6/D | 2711P-RP6 Ser D, Series D, Rev D | Request a Quote |
2711P-RP6/E | 2711P-RP6 Ser E, Series E, Rev E | Request a Quote |
2711P-RP6/F | 2711P-RP6 Ser F, Series F, Rev F | Request a Quote |
2711P-RP6/G | 2711P-RP6 Ser G, Series G, Rev G | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.