Allen-Bradley 2711P-RP2

The 2711P-RP2 is a PanelView operator terminal unit that has an internal memory of 128 MB flash memory and 128 MB random access memory (RAM). This logic module is compatible with the installation of PanelView Plus 700-1500 operator terminals. The PanelView operator terminal unit is attached to the display module. Various communication interfaces and supply voltage terminals are hosted by the terminal unit. It offers one (1) Ethernet communication port, 1 serial communication port, and two (2) USB ports. The terminal is powered by a 24 Volt DC power supply. A total of 70 Watts of power dissipation is provided by the 2711P-RP2 terminal.

The PanelView Plus CE operator terminal (OT) and PanelView Plus is provided with a display module and logic module unit. These units develop completely functional hardware. The logic module is attached to a particular slot of the OT unit. It can be used with PanelView PLUS CE-700, 1000, 1250, and 1500 OT units. Electronic components are also available in the module that are responsive to electrostatic discharge and need precise handling during the unpacking and fitting procedure. It is conformally coated with available options for the 700 to 1500 PanelView Plus Operating terminals. ActiveX controls, third party appliance support, PDF reader, and FTP server link are the standard featured that are offered by the logic module. The module features an Ethernet port, two USB ports, an RS-232 port, and a compact flash card slot with compact flash and 2711-RR128 RAM.

The 2711P-RP2 is a logic module designed for a PanelView Plus operator terminal by Allen Bradley / Rockwell Automation. This module offers 128 megabytes (MB) of flash memory, as well as 128 megabytes (MB) of RAM (random access memory). These logic modules are specifically designed for PanelView Plus 700 and 1500 operator terminals. The 2711P-RP2 interfaces with the display module. It houses a significant number of communication interfaces, as well as the supply voltage connection. It contains two (2) USB ports, one (1) Ethernet port, a serial interface, and a serial communication port. An external 24 volts DC power pack supplies the electricity to this module. This power pack has a rated power loss of 70 watts. ActiveX controls, third-party device compatibility, a PDF reader, and an FTP server connection are all standard features of the 2711P-RP2 logic module. This device has a Compact Flash memory of 2711P-RW2 and a RAM memory of 2711P-RR128. The A series, B series, C series, D series, E series, F series, and G series are all available for this device. The most current and popular series of this logic module is the 2711P-RP2 Series G. This logic module contains electronic components that are susceptible to electrostatic discharge and must be handled with care during unpacking and installation. Because the logic module lacks an IP protection rating, it should be stored in an environment with a temperature rating of fewer than 50 degrees Celsius and in a well-protected environment. Follow the instruction guide for further details.