GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-RN15S |
Series: | Comm Modules |
UPC: | 10781180181471 |
Description:
This ControlNet communication module with the part number 2711P-RN15S was designed and manufactured by Allen Bradley / Rockwell Automation. This device is equipped with two (2) ControlNet communication channels, as well as a single RJ45 network access port. PanelView Plus and PanelView Plus CE connectors may be used with this communication module. This module has physical dimensions that measure 11 inches x 8 inches x 6 inches. Additionally, the shipping weight of this device is approximately three (3) pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2711P-RN15S, which was designed and produced by Allen Bradley, is a ControlNet communication module that can be used to communicate with other devices. ControlNet ports are available on the 2711P-RN15S. This module has the ability to quickly transport large amounts of data. The logic module is installed initially, followed by this module. PanelView Plus, as well as PanelView Plus CE, operator connectors can be used with this module. Unscheduled ControlNet interaction with the 2711P-RN15S should be set up and used on both the workbench, as well as the PanelView port. The workstation should also have the latest version of PanelView Plus 400 and 600. This module's peer-to-peer networks speed up both functions significantly. You will get all the information you need to manage different devices from this module, which provides comprehensive data transmissions.
The Allen Bradley 2711P-RN15S's network is open, so it might be utilized to regulate networks in real-time for high-speed projects. Common Industrial Protocol is used to connect I/O network functionality. This module features two (2) ControlNet communication channels, as well as one (1) RJ45 Network Access Port (NAP) for connecting to a network. This module provides both scheduled and unscheduled communications. Only one ControlNet network may be connected to the 2711P-RN15S at once. It is recommended not to connect and unplug the module while the power is on, since this may result in electrical discharges. This module has physical dimensions that measure 11 inches x 8 inches x 6 inches. The approximate shipping weight of this module is three (3) pounds.
Region of Manufacture* | United States |
UNSPSC | 43201404 |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 2711P-RN15S?
Answer: Yes. We offer repairs for the 2711P-RN15S and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-RN15S?
Answer: If you buy the 2711P-RN15S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-RN15S online?
Answer: Yes. Automation Stop sells the 2711P-RN15S online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-RN15S?
Answer: The 2711P-RN15S is made by Allen Bradley - HMI.
Question: What type of product is the 2711P-RN15S?
Answer: The 2711P-RN15S is part of the Comm Modules series.
Question: What Region of Manufacture* is included with the 2711P-RN15S?
Answer: The 2711P-RN15S has a United States Region of Manufacture*.
Question: What is the UNSPSC of the 2711P-RN15S?
Answer: The Rockwell-Automation 2711P-RN15S has a UNSPSC of 43201404.
For additional information about 2711P-RN15S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-RN15S.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-RN15S/A | 2711P-RN15S Ser A, Series A, Rev A | Request a Quote |
2711P-RN15S/B | 2711P-RN15S Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.