GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-RN1

✓ In Stock

2711P-RN1 Image 1 thumbnail
2711P-RN1 Image 2 thumbnail
2711P-RN1 Image 3 thumbnail
Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-RN1
Series: Comm Modules

Description:

The Allen-Bradley 2711P-RN1 is considered as a communication module that supports the RIO communication protocol. This device can operate at a temperature range of 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) for indoor and outdoor applications. The module weighs approximately 907 grams (2 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2711P-RN1 is considered as a communication module that supports the RIO communication protocol. This module is compatible with PanelView Plus 400 and 600 displays. The communication module is a single-rack that includes a remote I/O. The 2711P-RN1 employs electrical isolation for communication between I/O ports and the panel terminal. This device controls and monitors messages and data between the machinery part and the display panel. The module can be employed with ControlLogix and PLC controllers. This module can monitor the data and information of the applications in real-time. The 2711P-RN1 is an open type module and should be mounted in an enclosure to protect the internal circuitry.

The 2711P-RN1 includes a scrolling display and LED indicators to indicate the electrical power presence and the communication status. The module contains the “COMM” LED indicator that shows the communication status. This module can be employed on a remote network as either a scanner or an adapter to exchange data. The 2711P-RN1 employs integer data. This module offers a universal remote I/O connection to link controllers with remote I/O chassis, operator interface, and either DC or AC drives. The 2711P-RN1 can be employed at an altitude of 2000 meters (6561 feet) above sea level. This device can operate at a temperature range of 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) for indoor and outdoor applications and weighs approximately 907 grams (2 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series Panelview Plus 400 and 600
Part Number 2711P-RN1
Description Remote I/O communication module
Communication protocol Remote I/O
Compatibility Allen-Bradley PanelView Plus 400 and 600 series
Number of racks 1
Electrical isolation Yes
Controllers PLC and ControlLogix controllers
LED indicators Yes
Size (Height x Length x Width) 8 x 8 x 5 in
Weight 907 g (2 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-RN1?

Answer: Yes. We offer repairs for the 2711P-RN1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-RN1?

Answer: If you buy the 2711P-RN1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-RN1 online?

Answer: Yes. Automation Stop sells the 2711P-RN1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-RN1?

Answer: The 2711P-RN1 is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-RN1?

Answer: The 2711P-RN1 is part of the Comm Modules series.


Question: What Brand is included with the Rockwell-Automation 2711P-RN1?

Answer: The Rockwell-Automation 2711P-RN1 has a Allen Bradley / Rockwell Automation Brand.


Question: What Communication protocol is included with the Allen-Bradley 2711P-RN1?

Answer: The 2711P-RN1 has a remote i/o Communication protocol.


Question: What is the Compatibility of the Allen Bradley 2711P-RN1?

Answer: The Allen Bradley 2711P-RN1 has a Compatibility of AB PanelView Plus 400 and 600 series .


Question: What kind of Controllers does the Allen Bradley-Rockwell Automation 2711P-RN1 have?

Answer: The 2711P-RN1 has Controllers PLC and ControlLogix controllers.


Question: What Description does the Allen Bradley 2711P-RN1 have?

Answer: The Allen Bradley 2711P-RN1 has a remote i/o communication module Description.


Question: Does the 2711P-RN1 have a Electrical isolation ?

Answer: Yes.


Question: Does the Rockwell Automation 2711P-RN1 have a LED indicators?

Answer: Yes.


Question: What is the Number of racks of the 2711P-RN1?

Answer: The 2711P-RN1 has a Number of racks of 1.


Question: What is the unit Number of the Rockwell Automation 2711P-RN1?

Answer: The unit Number of the 2711P-RN1 is 2711P-RN1.


Question: What is the Size (Height x Length x Width) of the Allen-Bradley 2711P-RN1?

Answer: The 2711P-RN1 has a Size (Height x Length x Width) of 8 x 8 x 5 in.


Question: What is the Weight of the 2711P-RN1?

Answer: The Weight of the 2711P-RN1 is 907 g (2 lb).


Series information for 2711P-RN1

For additional information about 2711P-RN1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-RN1.

Revision Part # Also Known As Availability
2711P-RN1/A 2711P-RN1 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2711P-RNI
  • 271IP-RN1
  • 271IP-RNI
  • 27I1P-RN1
  • 27I1P-RNI
  • 27IIP-RN1
  • 27IIP-RNI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP