GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-RDK7C

✓ In Stock

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-RDK7C
Series: Display Modules
UPC: 10611320817048

Description:

This module is a PanelView Plus operator terminal display. The 2711-RDK7C has compatibility usage with PanelView Plus 700 keypad operator terminals. Its display size measures 6.5 inches and its display area measures 132 millimeters by 99 millimeters. The module resolution is 640 by 480 while the display type is color active-matrix TFT. The 2711P-RDK7C does not come with a terminal power module. The full-color display comes with an embedded keypad.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

2711P-RDK7C is a PanelView Plus display terminal. This device is designed to control, monitor, and display information using colorful graphs, therefore, enabling the operators to see and work on the status of various applications. This device does not have an enclosure. Due to this, this device only measures seven (7) inches. The keypad is the supported operator input. This component has a high memory capacity of 512 megabytes of nonvolatile memory, as well as 512 megabytes of random access memory (RAM).

Its power input can either be direct or alternating current and the communication ports are ethernet and RS-232 serial. This terminal features 6.5-inch diagonal screen measurements with an actual viewing area of 132 millimeters by 99 millimeters. The display on this PanelView Plus display terminal has a resolution of 640 pixels by 480 pixels.

This operator terminal has no touch-sensitive cells. Therefore, keypad operated terminals may only be used during the installation. The main unit must be powered off for the purpose of disabling the module and disconnecting the board connection of the existing display module. Recommended anti-static & grounding protection should be implemented to help prevent damaging the module since it will not be housed inside an enclosure.

Adjustment of the module’s contrast and brightness is achieved using the operator’s terminals embedded configuration interface. For the purpose of getting extra protection and enhanced visibility, the installation of anti-glare overlays is carried out.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-RDK7C?

Answer: Yes. We offer repairs for the 2711P-RDK7C and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-RDK7C?

Answer: If you buy the 2711P-RDK7C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-RDK7C online?

Answer: Yes. Automation Stop sells the 2711P-RDK7C online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-RDK7C?

Answer: The 2711P-RDK7C is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-RDK7C?

Answer: The 2711P-RDK7C is part of the Display Modules series.


Series information for 2711P-RDK7C

For additional information about 2711P-RDK7C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-RDK7C.

Revision Part # Also Known As Availability
2711P-RDK7C/A 2711P-RDK7C Ser A, Series A, Rev A Request a Quote
2711P-RDK7C/B 2711P-RDK7C Ser B, Series B, Rev B Request a Quote
2711P-RDK7C/C 2711P-RDK7C Ser C, Series C, Rev C Request a Quote
2711P-RDK7C/D 2711P-RDK7C Ser D, Series D, Rev D Request a Quote
2711P-RDK7C/E 2711P-RDK7C Ser E, Series E, Rev E Request a Quote
2711P-RDK7C/F 2711P-RDK7C Ser F, Series F, Rev F Request a Quote
2711P-RDK7C/G 2711P-RDK7C Ser G, Series G, Rev G Request a Quote

Common Misspellings:

  • 271IP-RDK7C
  • 27I1P-RDK7C
  • 27IIP-RDK7C

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP