GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-K4M3A

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-K4M3A
Series: PV Plus 400

Description:

The Allen-Bradley 2711P-K4M3A is a PanelView 400 monochrome terminal. It includes a film compensated STN display with 120 Nits of screen brightness and a resolution of 320 x 240. The display spans 3-inches horizontally, 3.8 inches diagonally, and 2.3 inches vertically. The terminal comes with one USB port, one Ethernet port, and one RS-232 port. It has the following electrical (alternating current) characteristics: input frequency, voltage, and power (peak) of 47 to 63 Hz, 85 to 264 volts, and 60 volt-amperes, respectively.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley's 2711P-K4M3A is a PanelView Plus 400 terminal. It provides a small and low-cost interface for users/operators to interact with machines. This terminal is equipped with a monochrome passive-matrix display with FSTN based cell technology. It has a 3.5-inch diagonal display with a 3 x 2.3 inch display area. A keyboard is accessible for interacting with the terminal. It contains number keys, eight functional keys, and navigational keys. The terminal's base unit contains an RS-232 and a USB port for joining external hardware such as a scanner, modem, printer, and other accessories. Through modem connections, RS-232 offers full-duplex communication with PLCs. It also supports serial connections for DH485 communication. It also enables the point-to-point protocol (PPP) as well as file uploads and downloads. The most often used controllers are SLC500, 5/01, 5/02, MicroLogix,  and Micro800. This RS-232 connection, however, is not electrically isolated. The base unit also comprises one Ethernet port (RJ45), which enables communication by data transmission over the cords. This port is used for internet protocol (IP) communications, print, and app file management including upload and download. It also facilitates the integration of an external communication module through the network interface. The terminal also features a CompactFlash interface (max. 512 MB) and 5 MB of application flash memory. The terminal requires an alternating current power source of 85 to 264 volts at 47 to 63 hertz. The terminal provides IP65, IP54, NEMA 4x, NEMA 13, and NEMA 12 enclosure ratings. Its base unit weighs 1.24 pounds and measures 6.0 inches in width x 7.28 inches in height and 3.54 inches in depth.

Technical Specifications

MPN 2711P-K4M3A
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 400
Input Type Keypad
Display Type Grayscale
Display Size 3.5 in
Resolution 320 x 240
Power AC
PCI Max 5 W
Battery Life 5 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 85 BTU/hr
Backlight LED
External CompactFlash Storage 512 MB max
Input Voltage 85...264V AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-K4M3A?

Answer: Yes. We offer repairs for the 2711P-K4M3A and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-K4M3A?

Answer: If you buy the 2711P-K4M3A through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-K4M3A online?

Answer: Yes. Automation Stop sells the 2711P-K4M3A online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-K4M3A?

Answer: The 2711P-K4M3A is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-K4M3A?

Answer: The 2711P-K4M3A is part of the PV Plus 400 series.


Question: What Backlight does the 2711P-K4M3A have?

Answer: The 2711P-K4M3A has a LED Backlight.


Question: What Battery Life does the 2711P-K4M3A have?

Answer: The Battery Life of the Rockwell-Automation 2711P-K4M3A is 5 years min. at 25 °C (77 °F).


Question: What Clock does the 2711P-K4M3A have?

Answer: The Clock of the 2711P-K4M3A is Battery-backed, +/-2 minutes per month.


Question: What is the Display Size of the 2711P-K4M3A?

Answer: The Display Size of the 2711P-K4M3A is 3.5 in.


Question: What Display Type does the 2711P-K4M3A have?

Answer: The Rockwell-Automation 2711P-K4M3A has a Grayscale Display Type.


Question: What External CompactFlash Storage does the 2711P-K4M3A have?

Answer: The Allen Bradley Automation 2711P-K4M3A has a External CompactFlash Storage of 512 MB max.


Question: What is the Heat Dissipation of the Rockwell Automation 2711P-K4M3A?

Answer: The 2711P-K4M3A has a Heat Dissipation of 85 BTU/hr.


Question: What Input Type is included with the Rockwell-Automation 2711P-K4M3A?

Answer: The 2711P-K4M3A has a key Input Type.


Question: What is the Input Voltage of the 2711P-K4M3A?

Answer: The Rockwell-Automation 2711P-K4M3A has a Input Voltage of 85...264 volts alternating current (AC).


Question: What Operating Temperature does the Allen Bradley-Rockwell Automation 2711P-K4M3A have?

Answer: The Operating Temperature of the 2711P-K4M3A is 0...55 °C (32...131 °F).


Question: What PCI Max does the 2711P-K4M3A have?

Answer: The PCI Max of the Rockwell Automation 2711P-K4M3A is 5 W.


Question: What Power is included with the 2711P-K4M3A?

Answer: The Allen Bradley Automation 2711P-K4M3A has a AC (alternating current) Power.


Question: What Resolution does the 2711P-K4M3A have?

Answer: The Resolution of the Allen Bradley/Rockwell Automation 2711P-K4M3A is 320 x 240.


Series information for 2711P-K4M3A

For additional information about 2711P-K4M3A check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-K4M3A.

Revision Part # Also Known As Availability
2711P-K4M3A/A 2711P-K4M3A Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 271IP-K4M3A
  • 27I1P-K4M3A
  • 27IIP-K4M3A

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP