GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-K10C4A2

✓ In Stock

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-K10C4A2
Series: PV Plus 1000

Description:

The 2711P-K10C4A2 is a PanelView Plus 1000 color terminal that is manufactured by Allen-Bradley. The terminal has a 10.4-inch TFT display matrix. The terminal is embedded with a keypad that is used for inputs. The display screen on the terminal has an area of 8.3 x 6.2 inches and display images of 640 x 480 resolution. The 2711P-K10C4A2 needs an AC power source with 85 to 264 VAC of terminal voltage and 160 volt-amperes (maximum) of power. The terminal supports Ethernet (local area network), RS-232, and USB communication protocols. The terminal has an internal memory of 128 MB RAM and 128 MB of flash memory.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2711P-K10C4A2 1000 terminal is a user-friendly and low-cost HMI (human-machine interface) device. It offers modularity with 3 building blocks. The first block is a graphical display module with keypad support. The display type is an active matrix TFT color LCD display. The screen size is 10.4 inches with an effective viewing area of 211 x 158 mm and a resolution of 640 x 480. The keypad has numeric, arrow, and functional keys. The terminal includes two USB ports with a 5.25-volt open-circuit voltage and a 1.68 ampere short-circuit current (direct current). Its features and hardware support transfer to a variety of display sizes, typically larger, as well as changeable bezels. The 2711P-K10C4A2 has a logic module that features an Ethernet port that enables terminals to communicate through Ethernet with printers, servers, SLC 500 controllers, and other devices. The RS-232 port on the terminal offers full-duplex connection among the terminal, controller, and computer connection for application files and printing. Ther terminal has a rated memory of 128 MB RAM and 128 MB of flash memory. The memory of the terminal is able to be increased with the help of external devices. This operator terminal is equipped with an alternating current supply and requires an input power suppl voltage of 85 to 264 VAC at 47 to 63 hertz. The terminal has a maximum power consumption rating of 160 volt-amperes. The ambient environmental temperature must be between 0 to 50 degrees Celsius for normal operation. The module is equipped with two LED status indicators, green and red, for communications and hardware faults, respectively. 
 

Technical Specifications

MPN 2711P-K10C4A2
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 1000
Input Type Keypad
Display Type Color
Display Size 10.4 in
Resolution 640 x 480
Power AC
PCI Max 5 W
Battery Life 4 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 240 BTU/hr
Backlight CCFL 50,000 hours life, min.
Communication Ethernet, RS-232 & (2) USB
Logic Module 128 MB
External CompactFlash Storage 512 MB max
Input Voltage 85...264V AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-K10C4A2?

Answer: Yes. We offer repairs for the 2711P-K10C4A2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-K10C4A2?

Answer: If you buy the 2711P-K10C4A2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-K10C4A2 online?

Answer: Yes. Automation Stop sells the 2711P-K10C4A2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-K10C4A2?

Answer: The 2711P-K10C4A2 is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-K10C4A2?

Answer: The 2711P-K10C4A2 is part of the PV Plus 1000 series.


Question: What Backlight does the Allen Bradley/Rockwell Automation 2711P-K10C4A2 have?

Answer: The Backlight of the 2711P-K10C4A2 is CCFL 50,000 hours life, min..


Question: What Battery Life does the Allen Bradley 2711P-K10C4A2 have?

Answer: The Allen Bradley 2711P-K10C4A2 has a Battery Life of 4 years min. at 25 °C (77 °F).


Question: What Clock does the 2711P-K10C4A2 have?

Answer: The Clock of the 2711P-K10C4A2 is Battery-backed, +/-2 minutes per month.


Question: What Communication does the 2711P-K10C4A2 have?

Answer: The Communication of the Allen-Bradley 2711P-K10C4A2 is Ethernet, RS-232 & (2) USB.


Question: What Display Size does the 2711P-K10C4A2 have?

Answer: The Display Size of the 2711P-K10C4A2 is 10.4 in.


Question: What Display Type is included with the Allen Bradley-Rockwell Automation 2711P-K10C4A2?

Answer: The 2711P-K10C4A2 has a color Display Type.


Question: What is the External CompactFlash Storage of the 2711P-K10C4A2?

Answer: The 2711P-K10C4A2 has a External CompactFlash Storage of 512 MB max.


Question: What Heat Dissipation does the 2711P-K10C4A2 have?

Answer: The Allen Bradley-Rockwell Automation 2711P-K10C4A2 has a Heat Dissipation of 240 BTU/hr.


Question: What Input Type does the 2711P-K10C4A2 have?

Answer: The 2711P-K10C4A2 has a key Input Type.


Question: What Input Voltage does the Rockwell-Automation 2711P-K10C4A2 have?

Answer: The Input Voltage of the Rockwell-Automation 2711P-K10C4A2 is 85...264 volts AC (alternating current).


Question: What is the Logic Module of the Allen Bradley-Rockwell Automation 2711P-K10C4A2?

Answer: The Logic Module of the 2711P-K10C4A2 is 128 MB.


Question: What Operating Temperature does the 2711P-K10C4A2 have?

Answer: The Operating Temperature of the Allen-Bradley 2711P-K10C4A2 is 0...55 °C (32...131 °F).


Question: What is the PCI Max of the 2711P-K10C4A2?

Answer: The PCI Max of the Rockwell-Automation 2711P-K10C4A2 is 5 W.


Question: What Power does the 2711P-K10C4A2 have?

Answer: The 2711P-K10C4A2 has a AC (alternating current) Power.


Question: What is the Resolution of the 2711P-K10C4A2?

Answer: The Allen Bradley 2711P-K10C4A2 has a Resolution of 640 x 480.


Series information for 2711P-K10C4A2

For additional information about 2711P-K10C4A2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-K10C4A2.

Revision Part # Also Known As Availability
2711P-K10C4A2/A 2711P-K10C4A2 Ser A, Series A, Rev A Request a Quote
2711P-K10C4A2/B 2711P-K10C4A2 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 2711P-K1OC4A2
  • 2711P-KI0C4A2
  • 2711P-KIOC4A2
  • 271IP-K10C4A2
  • 271IP-K1OC4A2
  • 271IP-KI0C4A2
  • 271IP-KIOC4A2
  • 27I1P-K10C4A2
  • 27I1P-K1OC4A2
  • 27I1P-KI0C4A2
  • 27I1P-KIOC4A2
  • 27IIP-K10C4A2
  • 27IIP-K1OC4A2
  • 27IIP-KI0C4A2
  • 27IIP-KIOC4A2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP