GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2711E-T14C6

✓ In Stock

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711E-T14C6
Series: Panelview 2711E
UPC: 883809297242

Description:

The 2711E-T14C6 is a Human Machine Interface unit. It is part of the Allen-Bradley PanelView terminals. It comes with a 14-inch display. The display features diagonal CRT technology. It supports 247.6 mm � 185.7 millimeters. This Touchscreen interface comes with an embedded Remote I/O communications port. It also features an integral 2.25MB user memory on this module. The keypad can be used for local programming. It comes with compliance with many industry standards.


Key Features:

  • ships with 2.25 mb memory
  • ships with 180 to 264 volts ac of input voltage
  • comes discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2711E-T14C6 is an HMI interface device. It needs a voltage of 85-264 Volts AC, 47-63 Hertz. It is ideally designed for offering monitoring features. It should be placed in a suitable location in a factory. The resolution on the 247.6 millimeters × 185.7 millimeters screen size is 640 pixels by 480 pixels. In order to improve the visibility of the display screen, it has an anti-glare component. 192 or 16 pixels x 12 pixels is the minimum number of cells on this HMI. 2.5 to 3 pounds (71 to 85 grams) is the actuation rating of this Allen Bradley module. The aluminum body comes with a stunning bezel. The bezel has a black powder coating around it. The module uses scratch-resistant polyester and is hard coated. It comes with compatibility for different operator terminals.  Some of these terminals are the Data Highway Plus and the Remote I/O communications port.

The Allen-Bradley 2711E-T14C6 Human Machine Interface (HMI) comes with support for high-speed communication. For this purpose, this HMI uses the daisy-chain topology. It requires the Allen-Bradley 1771-CD cable. The Belden 9463 cable is also supported by this HMI 60 Watts is the rated minimum power consumption rating. On the other hand, 100 Watts is the maximum power consumption rating. The built-in integrated CMOS battery has a 10 years lifespan. It also has a permanent battery. 256 KB is the built-in flash user memory on this HMI. The keypad supports local programming.

Technical Specifications

Type Operator Interface Panel
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711E-T14C6?

Answer: Yes. We offer repairs for the 2711E-T14C6 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711E-T14C6?

Answer: If you buy the 2711E-T14C6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711E-T14C6 online?

Answer: Yes. Automation Stop sells the 2711E-T14C6 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711E-T14C6?

Answer: The 2711E-T14C6 is made by Allen Bradley - HMI.


Question: What type of product is the 2711E-T14C6?

Answer: The 2711E-T14C6 is part of the Panelview 2711E series.


Series information for 2711E-T14C6

For additional information about 2711E-T14C6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711E-T14C6.

Revision Part # Also Known As Availability
2711E-T14C6/A 2711E-T14C6 Ser A, Series A, Rev A Request a Quote
2711E-T14C6/B 2711E-T14C6 Ser B, Series B, Rev B Request a Quote
2711E-T14C6/C 2711E-T14C6 Ser C, Series C, Rev C Request a Quote
2711E-T14C6/D 2711E-T14C6 Ser D, Series D, Rev D Request a Quote
2711E-T14C6/E 2711E-T14C6 Ser E, Series E, Rev E Request a Quote
2711E-T14C6/F 2711E-T14C6 Ser F, Series F, Rev F Request a Quote
2711E-T14C6/G 2711E-T14C6 Ser G, Series G, Rev G Request a Quote

Common Misspellings:

  • 2711E-T14CG
  • 2711E-TI4C6
  • 2711E-TI4CG
  • 271IE-T14C6
  • 271IE-T14CG
  • 271IE-TI4C6
  • 271IE-TI4CG
  • 27I1E-T14C6
  • 27I1E-T14CG
  • 27I1E-TI4C6
  • 27I1E-TI4CG
  • 27IIE-T14C6
  • 27IIE-T14CG
  • 27IIE-TI4C6
  • 27IIE-TI4CG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP