Allen-Bradley 2711C-T3M

The 2711C-T3M from Allen-Bradley/Rockwell is an industrial terminal from the PanelView Component series. The electrical designer can easily link external equipment (e.g: a PLC) to the HMI with its Ethernet interface. The user may easily exploit the terminal via a set of numeric and function keys. PanelView Component DesignStation is a programming environment that has to be installed in order to develop HMI programs for the device. With this environment the user will use a lot of useful features for HMI application programming. This tool is exploited to backup or download HMI applications to the terminal. The heaviest hit that this model can withstand is 15 g in working settings and 30 g when the system is not operating. The ambient temperature in the surroundings the module shall remain between 32 and 122 degrees Fahrenheit when the operator terminal is in running conditions and should be in the range from -13 to 158 degrees Fahrenheit when the system is not operating. The 2711C-T3M provides the user a 2.64 by 1.30 inches monochromatic transmissive FSTN passive matrix display. The energy consumption of the 2711C-T3M is around 4.7 watt at the nominal temperature. The 2711C-T3M allows the use of external memory card in order to load applications. A significant aspect to maintain the proper safety of the device is cooling. The engineer should provide adequate space in the case and consider other systems in this study. The panel should not stand pulses heavier than 2 g at the frequency of 500 hertz. A door to must be designed to make sure to be able perform troubleshooting, maintenance and wiring activities.

2711C-T3M is a PanelView Component C300 terminal by Allen-Bradley. For low-level applications with a serial connection, this component-level operator interface provides a control and visualization solution. Web application creates Human-Machine Interface (HMI) applications while your computer is connected directly to the terminal. The direct result shows on the terminal display without having to download it first. It has a size of 5.47 x 4.69 inches with an active display area of 2.64 x 1.30 inches. It has 3 inches of Monochrome transreflective FSTN passive matrix display with a resolution of 128 x 64 pixels, and an analog touch for input. It has a non-replaceable backlight with a minimum of 50,000 hours of life with a white status indicator. It has an input voltage range from 18VDC to 30VDC with a nominal value of 24VDC, maximum power consumption of 5 watts, and heat dissipation of 16 British thermal units(BTU) per hour. It has a multipurpose RS-232 port which supports DF1 full-duplex communication with controllers using direct/modem connection, and DH-485 communication through a serial connection. Preferred controllers are MicroLogix, SLC, and Micro800. It also has an RS-485 port that supports point-to-point communication, a USB device port for maintenance or programming only, and a USB host port to power USB peripherals. It is connected to a browser using a USB port. Install the Allen-Bradley PanelView USB remote NDIS Network Device driver before connecting your computer to the USB port of the 2711C-T3M.