Allen-Bradley 2711-B6C2

The 2711-B6C2 is a PanelView 600 operator terminal is a product of Allen Bradley/Rockwell Automation. It belongs to the PanelView 600 product line. The terminal uses a DH-485 communication port to enhance effective communication over a network. The PanelView 600 terminals including 2711-B6C2 with the DH-485 communication port, are best for point-to-point communication using one SLC 500 or the MicroLogix controller. Allen Bradley 2711-B6C2 also has a 1747-UIC communication cable which is used for connection to the network. The terminal also comes with a keypad on the human-machine interface (HMI) for input as well as a display that doubles as a touchscreen. It operates on an input power range of 85 – 264 volts of AC and an internal memory of 240 kilobytes. This terminal has approximated measurements of 14 x 11 x 8 inches. Allen Bradley 2711-B6C2 operator terminal specially designed and intended to offer the operator a processor speed of 1 gigahertz. This module has a human-machine interface display, which measures 5 inches diagonally with LEDs backlit as well as full-color graphics. This terminal has a screen transition rate of up to 70 percent faster than the other terminals. Besides, it has an additional memory capacity which ranges from 64 – 256 megabytes of RAM. It also has an increased flash storage space of 64 – 512 megabytes including 80 megabytes non-volatile storage memory for storage applications. The 2711-B6C2 operator terminal also features a more excellent connectivity with a wide range of peripherals, such as keyboards, printers and mice.

The Allen-Bradley 2711-B6C2 is a PanelView 600 standard operator terminal. To communicate across the network, it uses the built-in DH-485 communication port. UsingMicroLogix controller or the single SLC 500, this operator terminal can be connected for the purpose of performing point-to-point communication. It is compatible with 1747-UIC communication adapter. Using the 1747-UIC communication adapter, users can establish connection between the 711-B6C2 and a DH-485 network. As for the HMI (human machine interface) input interface for this device, it is equipped with both a touchscreen and a keypad interface. 

The Allen-Bradley 2711-B6C2 has an internal memory consisting of two hundred and forty (240) kilobytes (kb). The internal processor has a clock speed of 1 Gigahertz. It comes with a field-replaceable backlight. When measure diagonally, the accurate display area measurement for this operator terminal is five (5) inches. When compared to other operator terminals, the Allen-Bradley 2711-B6C2 comes with a seventy percent (70%) faster screen transitioning rating. Also, the memory capacity on this module is also higher than most other modules in the market. 

Although this operator terminal comes with only one (1) communication port, it comes with support for the DH-485 protocol. It is ideal for factory-floor communication. For performing peer-to-peer communication users must use the RS-232 serial interface port. The shipping weight of this operator terminal is approximately six (6) pounds (lbs). The display area of this device's screen is one hundred and fifteen (115) millimeters by eighty-six (86) millimeters, or four-point-five-four (4.54) inches by three-point-four (3.4) inches.