GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Automation Product |
Part Number: | 25B-D010N104 |
Series: | PowerFlex 525 |
Description:
The 25B-D010N104 is a PowerFlex 525-series AC Drive designed and manufactured by Allen-Bradley. The drive has a frame size B and a NEMA IP20 open-type enclosure. The drive has an input voltage range of 323 to 528 volts AC. The output rated parameters are 4.0 kilowatts of power, 5 horsepower, and 10.5 amperes of output current. The drive has a total power loss of 129 watts. The temperature range suitable for this device to be operational is -20 to 50 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Rockwell Automation Power Flex 525 series variable frequency drive (VFD) 25B-D010N104 has an output rating of 5 to 7 horsepower (4 to 5.5 Kilowatts) under normal and heavy duty. The ampere rating is 12.6 to 14.1 Amperes with a maximum limit of 13.8 to 15.4 Amperes. In an IP20 open-type enclosure the power loss is 129 to 170 Watts. The output frequency is programmable in the range of 0 to 500 Hertz and efficiency is typically 97.5%. In the source mode the ON voltage is 18 to 24 Volts and OFF voltage is 0 to 6 volts, whereas in sink mode it is the reverse. The analog control input is 4 to 20 milliamps with 250 ohms input impedance and 0 to 10 volts direct current analog with 100,000 ohms input impedance. The control output is programmable with Form A and Form B. The resistive rating is 3 Amperes at 30 volts direct current, 125 volts alternate current, and 240 volts alternate current. The inductive rating is 0.5 Amperes at 20 volts direct current, 125 volts alternate current, and 240 volts alternate current. It also offers a 10-bit analog output of 0 to 10 Volts with 1,000 ohms minimum and 4 to 20 milliamps with 525 ohms maximum. Its protective features include an electronic motor overload protection, overcurrent protection at 200 percent of the hardware limit and instantaneous fault at 300 percent. The control ride though is at least 0.5 seconds, but more typically set at 2 seconds. The faultless power ride through is 100 milliseconds.
The 25B-D010N104 is a Frequency AC drive belonging to the Power Flex 525 family of products. This product, which was manufactured by the Allen-Bradley company, has an rated input voltage of 323 volts to 528 volts. This device has a power loss total of one hundred and twenty-nine (129) watts. The input kVA rating of the Allen-Bradley 25B-D010N104 is 12.6 kVA maximum, and it has an input current rating of 13.8 amperes. The Allen-Bradley 25B-D010N104 has a B frame size with an open-type enclosure. On both normal and heavy-duty, this AC drive has an output of five (5.0) Hp, or horsepower, and a power of four (4) kilowatts, while the output current is 10.5 amperes, making this device approximately seventy-five percent (75%) efficient. The PowerFLex 520 series drives include both a control module and power module that is capable of being detached, allowing for simultaneous configuration as well as installation. This Frequency AC drive is equipped with a common control module, which is used throughout the power range within this device. With the MainsFree programming setup, an operator may connect their control module with a PC, or personal computer, via USB cable. With this connection, an operator may download and upload almost instantly, while also being able to do other things. This device supports accessory cards without changing the footprint. This device can accommodate up to two (2) accessory cards. This Frequency AC drive interacts via an Ethernet/IP port that is embedded within the device. This allows for control of the Ethernet network. Additionally, this device is equipped with an embedded RS-485 serial interface, which allows for a multi-drop communication setup. The recommended temperature for the operation of the Allen-Bradley 25B-D010N104 ranges from negative twenty (-20) to positive fifty (50) degrees Celsius (°C) with no derating. This Allen-Bradley product has dimensions measuring approximately 87 mm x 180 mm x 172 mm and weighs approximately 1.6 kg.
Manufacturer | Allen Bradley / Rockwell Automation |
Series | PowerFlex 525 Adjustable Frequency AC Drive |
MPN | 25B-D010N104 |
Voltage | 480V AC |
Phase | 3 |
Enclosure | IP 20 NEMA/Open |
Interface Module | Standard |
EMC Filter | No Filter |
Braking | Standard |
Amps | 10.5 |
Frame | B |
HP (Normal Duty) | 5 |
kW (Normal Duty) | 4 |
HP (Heavy Duty) | 5 |
kW (Heavy Duty) | 4 |
Question: Does Automation Stop offer repairs on the 25B-D010N104?
Answer: Yes. We offer repairs for the 25B-D010N104 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 25B-D010N104?
Answer: If you buy the 25B-D010N104 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 25B-D010N104 online?
Answer: Yes. Automation Stop sells the 25B-D010N104 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 25B-D010N104?
Answer: The 25B-D010N104 is made by Allen Bradley - Drives.
Question: What type of product is the 25B-D010N104?
Answer: The 25B-D010N104 is part of the PowerFlex 525 series.
Question: What is the amperes of the 25B-D010N104?
Answer: The amperes of the Allen Bradley-Rockwell Automation 25B-D010N104 is 10.5.
Question: What Braking is included with the Allen-Bradley 25B-D010N104?
Answer: The 25B-D010N104 has a Standard Braking.
Question: Does the Rockwell-Automation 25B-D010N104 have a EMC Filter?
Answer: No Filter.
Question: What is the Enclosure of the Allen-Bradley 25B-D010N104?
Answer: The Allen-Bradley 25B-D010N104 has a Enclosure of IP 20 NEMA/Open.
Question: What Frame is included with the Allen Bradley 25B-D010N104?
Answer: The 25B-D010N104 has a B Frame.
Question: What is the HP (Heavy Duty) of the Allen Bradley-Rockwell Automation 25B-D010N104?
Answer: The Allen Bradley-Rockwell Automation 25B-D010N104 has a HP (Heavy Duty) of 5.
Question: What is the HP (Normal Duty) of the 25B-D010N104?
Answer: The 25B-D010N104 has a HP (Normal Duty) of 5.
Question: What Interface Module does the Rockwell Automation 25B-D010N104 have?
Answer: The 25B-D010N104 has a Standard Interface Module.
Question: What kW (Heavy Duty) does the 25B-D010N104 have?
Answer: The Allen Bradley-Rockwell Automation 25B-D010N104 has a kW (Heavy Duty) of 4.
Question: What is the kW (Normal Duty) of the 25B-D010N104?
Answer: The 25B-D010N104 has a kW (Normal Duty) of 4.
Question: What is the Phase of the 25B-D010N104?
Answer: The Phase of the Allen-Bradley 25B-D010N104 is 3.
Question: What is the Voltage of the Allen Bradley 25B-D010N104?
Answer: The Allen Bradley 25B-D010N104 has a Voltage of 480 volts alternating current (AC).
For additional information about 25B-D010N104 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25B-D010N104.
Revision Part # | Also Known As | Availability |
---|---|---|
25B-D010N104/A | 25B-D010N104 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.