GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Automation Product |
Part Number: | 25B-A8P0N104 |
Series: | PowerFlex 525 |
UPC: | 884951885899 |
Description:
Allen Bradley's 25B-A8P0N104 AC Drive is part of the PowerFlex 525 series. It has embedded Ethernet/IP and safety features and operates at 240 volts AC, 1 phase, 8-amps output current, 2 Hp, 1.5 kW normal duty and 2 Hp, 1.5 kW heavy-duty. It has a frame B, IP20 NEMA / open type grade enclosure, no filter. This module boasts a modular architecture with a replaceable control core. This AC drive incorporates permanent magnet motor operation, which contributes to increased energy efficiency and cost reduction.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's Powerflex sequence drives have a good status in the industry, and the 25B-A8P0N104 from Allen-Bradley’s drive maintains that reputation. The 25B-A8P0N104 is a Powerflex 525 series air-cooled drive. This is a three-phase drive with a two horsepower rating. The 25B-current A8P0N104's rating is 8 amps. The 25B-A8P0N104 has an EMC filter in addition to the regular braking functions.
Additionally, it supports point-to-point positioning and closed-loop feedback. As a result, the 25B-A8P0N104 is capable of supporting a broad variety of motor control choices. The 25B-A8P0N104 is rated for an input voltage range of 200 to 240 volts and an output voltage range of 240 volts AC. The 25B-A8P0N104 has a frequency rating of 50 to 60 hertz.
Its built-in Ethernet/IP support allows for seamless interaction with the Logix platform and Ethernet/IP networks. It functions safe torque-off does have a PLd/SIL2 Cat 3 approval. Increases motor rotational power without lowering drive capacity, enabling for a faster start-up following a safety mechanism demand. In comparison to its rated power, it has a tiny footprint and a zero stacking installation style with an airflow gap of 50 mm.
The impedance range of the 25B-A8P0N104 is 30 volts DC and 125 through 240 volts AC. The inductive rating of the drive is 30 volts DC with 0.5 amps current flow rates and 125 to 240 volts AC. The 25B-A8P0N104 is equipped with 2 programmable options. The 25B-A8P0N104 is mounted on a panel and housed in a NEMA-approved open grade IP20 container. The 25B-A8P0N104 is a fixed-type terminal equipped with a modern smart display. The display of the 25B-A8P0N104 has a combined keyboard, LED accessories, and a pot. The 25B-A8P0N104 is controlled by an Ethernet IP-USB-RS485 link. Also, it comes with an IGBT Brake system.
Manufacturer | Allen Bradley / Rockwell Automation |
Series | PowerFlex 525 Adjustable Frequency AC Drive |
MPN | 25B-A8P0N104 |
Voltage | 240V AC |
Phase | 1 |
Enclosure | IP 20 NEMA/Open |
Interface Module | Standard |
EMC Filter | No Filter |
Braking | Standard |
Amps | 8 |
Frame | B |
HP (Normal Duty) | 2 |
kW (Normal Duty) | 1.5 |
HP (Heavy Duty) | 2 |
kW (Heavy Duty) | 1.5 |
Question: Does Automation Stop offer repairs on the 25B-A8P0N104?
Answer: Yes. We offer repairs for the 25B-A8P0N104 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 25B-A8P0N104?
Answer: If you buy the 25B-A8P0N104 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 25B-A8P0N104 online?
Answer: Yes. Automation Stop sells the 25B-A8P0N104 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 25B-A8P0N104?
Answer: The 25B-A8P0N104 is made by Allen Bradley - Drives.
Question: What type of product is the 25B-A8P0N104?
Answer: The 25B-A8P0N104 is part of the PowerFlex 525 series.
Question: What is the amperes of the 25B-A8P0N104?
Answer: The amperes of the Allen Bradley 25B-A8P0N104 is 8.
Question: What Braking does the Allen Bradley Automation 25B-A8P0N104 have?
Answer: The Allen Bradley Automation 25B-A8P0N104 has a Standard Braking.
Question: Does the Rockwell-Automation 25B-A8P0N104 have a EMC Filter?
Answer: No Filter.
Question: What Enclosure does the 25B-A8P0N104 have?
Answer: The Enclosure of the 25B-A8P0N104 is IP 20 NEMA/Open.
Question: What Frame does the 25B-A8P0N104 have?
Answer: The 25B-A8P0N104 has a B Frame.
Question: What is the HP (Heavy Duty) of the Allen Bradley-Rockwell Automation 25B-A8P0N104?
Answer: The HP (Heavy Duty) of the 25B-A8P0N104 is 2.
Question: What is the HP (Normal Duty) of the 25B-A8P0N104?
Answer: The 25B-A8P0N104 has a HP (Normal Duty) of 2.
Question: What Interface Module is included with the 25B-A8P0N104?
Answer: The Allen Bradley 25B-A8P0N104 has a Standard Interface Module.
Question: What kW (Heavy Duty) does the Allen Bradley-Rockwell Automation 25B-A8P0N104 have?
Answer: The kW (Heavy Duty) of the 25B-A8P0N104 is 1.5.
Question: What kW (Normal Duty) does the Rockwell-Automation 25B-A8P0N104 have?
Answer: The kW (Normal Duty) of the Rockwell-Automation 25B-A8P0N104 is 1.5.
Question: What is the Phase of the Allen-Bradley 25B-A8P0N104?
Answer: The Allen-Bradley 25B-A8P0N104 has a Phase of 1.
Question: What Voltage does the 25B-A8P0N104 have?
Answer: The 25B-A8P0N104 has a Voltage of 240 volts alternating current (AC).
For additional information about 25B-A8P0N104 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25B-A8P0N104.
Revision Part # | Also Known As | Availability |
---|---|---|
25B-A8P0N104/A | 25B-A8P0N104 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.