GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 25A-D2P3N114

✓ In Stock

25A-D2P3N114 Image 1 thumbnail
25A-D2P3N114 Image 2 thumbnail
25A-D2P3N114 Image 3 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Automation Product
Part Number: 25A-D2P3N114
Series: PowerFlex 523

Description:

Allen-Bradley PowerFlex 523 series AC Drive 25A-D2P3N114 features a three-phase output, 480 VAC voltage, and a current rating of 2.3 Amperes, 1.0 horsepower, 0.75-kilowatt standard duty; 1.0 horsepower, 0.75-kilowatt heavy duty, frame size A, IP20 NEMA / open type, with EMC Filter, with 7th IGBT Brake. For ambient temperatures less than 45 degrees Celsius, the 25A-D2P3N114 installation requires no stacking. It supports side-by-side installation with a 50mm (1.96 in) airflow gap between the top and bottom of the Drive and low-cost networking through an inbuilt RS485/DSI interface.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley's 25A-D2P3N114 is a 523-series PowerFlex AC drive. This device offers a wide variety of motor control choices, generates considerable energy savings, and includes all usual safety features. The PowerFlex 25A-D2P3N114 drive is appropriate for a wide variety of industrial applications; it operates between 380 and 480 volts AC, has a rated power of 0.75 kW (1 Hp), a current rating of 2.3 amps, an inbuilt EMC filter, and an IP20 NEMA/open enclosure. It is distinguished by its modular architecture, and removable control and power modules enable simultaneous setup and installation.

The AB 25A-D2P3N114 may be installed without stacking (at ambient temperatures less than 45 degrees Celsius), so saving space. While this device is mainly designed for usage with independent devices, an integrated DSI port may be inserted and used in conjunction with a communication adapter card to enable multi-drive networking (up to five PowerFlex AC drives can be connected on a single node in this manner). Additionally, a failure history record is available, as is password-lock security.

Volts/Hertz and SVC are the motor control choices for this AC drive (Sensorless Vector Control). Built-in brake transistors enable dynamic braking with just two brake resistors, and a single PID loop increases application versatility and control precision. Numerous inputs/outputs are provided for interfacing with other devices, including one analog input that is independently isolated, five digital inputs (four of which may be programmed), and one relay output. This item weighs around 1.1 kilograms and is roughly 72 x 152 x 172 millimeters. 

Technical Specifications

Manufacturer Allen Bradley / Rockwell Automation
Series PowerFlex 523 Adjustable Frequency AC Drive
MPN 25A-D2P3N114
Voltage 480V AC
Phase 3
Enclosure IP 20 NEMA/Open
Interface Module Standard
EMC Filter Filter
Braking Standard
Amps 2.3
Frame A
HP (Normal Duty) 1
kW (Normal Duty) 0.75
HP (Heavy Duty) 1
kW (Heavy Duty) 0.75
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 25A-D2P3N114?

Answer: Yes. We offer repairs for the 25A-D2P3N114 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 25A-D2P3N114?

Answer: If you buy the 25A-D2P3N114 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 25A-D2P3N114 online?

Answer: Yes. Automation Stop sells the 25A-D2P3N114 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 25A-D2P3N114?

Answer: The 25A-D2P3N114 is made by Allen Bradley - Drives.


Question: What type of product is the 25A-D2P3N114?

Answer: The 25A-D2P3N114 is part of the PowerFlex 523 series.


Question: What is the amperes of the Rockwell Automation 25A-D2P3N114?

Answer: The amperes of the Rockwell Automation 25A-D2P3N114 is 2.3.


Question: What Braking is included with the 25A-D2P3N114?

Answer: The 25A-D2P3N114 has a Standard Braking.


Question: What EMC Filter does the Allen Bradley 25A-D2P3N114 have?

Answer: The Allen Bradley 25A-D2P3N114 has a Filter EMC Filter.


Question: What is the Enclosure of the Rockwell Automation 25A-D2P3N114?

Answer: The Enclosure of the Rockwell Automation 25A-D2P3N114 is IP 20 NEMA/Open.


Question: What Frame is included with the 25A-D2P3N114?

Answer: The Allen Bradley 25A-D2P3N114 has a A Frame.


Question: What is the HP (Heavy Duty) of the Rockwell Automation 25A-D2P3N114?

Answer: The Rockwell Automation 25A-D2P3N114 has a HP (Heavy Duty) of 1.


Question: What is the HP (Normal Duty) of the Allen-Bradley 25A-D2P3N114?

Answer: The HP (Normal Duty) of the 25A-D2P3N114 is 1.


Question: What Interface Module does the Rockwell Automation 25A-D2P3N114 have?

Answer: The 25A-D2P3N114 has a Standard Interface Module.


Question: What is the kW (Heavy Duty) of the 25A-D2P3N114?

Answer: The Allen Bradley Automation 25A-D2P3N114 has a kW (Heavy Duty) of 0.75.


Question: What is the kW (Normal Duty) of the 25A-D2P3N114?

Answer: The Allen Bradley/Rockwell Automation 25A-D2P3N114 has a kW (Normal Duty) of 0.75.


Question: What is the Phase of the 25A-D2P3N114?

Answer: The 25A-D2P3N114 has a Phase of 3.


Question: What Voltage does the 25A-D2P3N114 have?

Answer: The Voltage of the Allen-Bradley 25A-D2P3N114 is 480 volts AC (alternating current).


Series information for 25A-D2P3N114

For additional information about 25A-D2P3N114 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 25A-D2P3N114.

Revision Part # Also Known As Availability
25A-D2P3N114/A 25A-D2P3N114 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 25A-D2P3N1I4
  • 25A-D2P3NI14
  • 25A-D2P3NII4
  • 2SA-D2P3N114
  • 2SA-D2P3N1I4
  • 2SA-D2P3NI14
  • 2SA-D2P3NII4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP