GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2097-V32PR4

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2097-V32PR4
Series: Kinetix 300

Description:

The Kinetix 350 single-axis EtherNet/IP servo drive offers simplified integration of the entirety of control solutions in the network. It works with ControlLogix controllers that support Integrated Motion on the network.


Key Features:

  • contains 9.37 x 9.04 x 3.42 in (238 x 230 x 87.0 mm) dimensions
  • provides an operating temperature of 32-104 f (0-40 c)

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Kinetix 350 drive 2097-V32PR4 is single-phase with an input voltage of 240 Volts and a continuous output current (0-peak) of 11.3 Amperes. The drive features integrated AC line filter and safe torque off. The drive has integrated motion on EtherNet/IP drives and Bulletin 2097 shunt resistors that connect to the drive and provide shunting in regenerative applications. The terminal block for I/O has 50 pins and can be interfaced using the IOD connector. The EtherNet data traffic is regulated and managed using an EtherNet switch. The EtherNet/IP networking with CompactLogix controllers 5370 and 5380 is done with embedded dual port. It has an AC input voltage range of 80 to 264 Volts rms single-phase (240 Volts nominal) and an AC input frequency of 48 to 62 Hertz. The AC input current is 15 Amperes and max inrush (0-peak) 240 Volt input is 2.3 Amperes. The continuous current output is 8 Amperes (rms) and 11.3 Amperes (0-peak) with peak output current of 24 Amperes (rms) and (0-peak) value of 33.9 Amperes. The continuous power output at rated voltage is 1.7 Kilowatts. Shunt on voltage is 390 Volts DC and shunt off is at 375 Volts DC. The overvoltage limit is 430 Volts DC. The drive has a short-circuit current rating of 100,000 Amperes (rms) symmetrical. The power dissipation rate is 67 Watts maximum and it weighs about 2.2 kilograms (4.9 pounds). The overall dimensions of the drive are 230 x 87 x 238 millimeters (9.04 x 3.42 x 9.37 inches). It is operable within a temperature range of 0 to 40 degrees Celsius.

Technical Specifications

AC input voltage 80 to 264 Volts rms, 1-phase
AC input frequency 48 to 62 Hertz
Main AC input current 15 Amperes (rms) and 2.3 Amperes (max inrush)
Integrated AC line filter Yes
Control power back-up input voltage 20 to 26 Volts DC
Control power back-up current 500 milliamperes (nom.), 30 Amperes (max inrush, 0-peak)
Continuous current (rms) 8 Amperes
Continuous output current (0-peak) 11.3 Amperes
Peak output current 24 Amperes
Peak output current (0-peak) 33.9 A
Continuous power output 1.7 Kilowatts
Shunt 390 Volts (On), 375 Volts (Off)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2097-V32PR4?

Answer: Yes. We offer repairs for the 2097-V32PR4 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2097-V32PR4?

Answer: If you buy the 2097-V32PR4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2097-V32PR4 online?

Answer: Yes. Automation Stop sells the 2097-V32PR4 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2097-V32PR4?

Answer: The 2097-V32PR4 is made by Allen Bradley - Drives.


Question: What type of product is the 2097-V32PR4?

Answer: The 2097-V32PR4 is part of the Kinetix 300 series.


Question: What is the AC (alternating current) input frequency of the Rockwell Automation 2097-V32PR4?

Answer: The Rockwell Automation 2097-V32PR4 has a AC (alternating current) input frequency of 48 to 62 Hertz.


Question: What is the AC (alternating current) input voltage of the 2097-V32PR4?

Answer: The alternating current (AC) input voltage of the Rockwell Automation 2097-V32PR4 is 80 to 264 Volts rms, 1-phase.


Question: What Continuous current (rms) does the 2097-V32PR4 have?

Answer: The 2097-V32PR4 has a Continuous current (rms) of 8 Amperes.


Question: What is the Continuous output current (0-peak) of the 2097-V32PR4?

Answer: The Continuous output current (0-peak) of the Rockwell-Automation 2097-V32PR4 is 11.3 Amperes.


Question: What is the Continuous power output of the 2097-V32PR4?

Answer: The Allen Bradley/Rockwell Automation 2097-V32PR4 has a Continuous power output of 1.7 Kilowatts.


Question: What Control power back-up current does the 2097-V32PR4 have?

Answer: The Rockwell Automation 2097-V32PR4 has a Control power back-up current of 500 milliamperes (nom.), 30 Amperes (max inrush, 0-peak).


Question: What is the Control power back-up input voltage of the Allen-Bradley 2097-V32PR4?

Answer: The 2097-V32PR4 has a Control power back-up input voltage of 20 to 26 Volts DC (direct current).


Question: Does the 2097-V32PR4 have a Integrated alternating current (AC) line filter?

Answer: Yes.


Question: What is the Main alternating current (AC) input current of the 2097-V32PR4?

Answer: The Main AC (alternating current) input current of the 2097-V32PR4 is 15 Amperes (rms) and 2.3 Amperes (max inrush).


Question: What Peak output current does the Allen Bradley Automation 2097-V32PR4 have?

Answer: The Peak output current of the 2097-V32PR4 is 24 Amperes.


Question: What Peak output current (0-peak) does the 2097-V32PR4 have?

Answer: The 2097-V32PR4 has a Peak output current (0-peak) of 33.9 A.


Question: What is the Shunt of the 2097-V32PR4?

Answer: The Shunt of the 2097-V32PR4 is 390 Volts (On), 375 Volts (Off).


Series information for 2097-V32PR4

For additional information about 2097-V32PR4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2097-V32PR4.

Revision Part # Also Known As Availability
2097-V32PR4/A 2097-V32PR4 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2O97-V32PR4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP