GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2094-BM03-M

2094-BM03-M Image 1 thumbnail
2094-BM03-M Image 2 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2094-BM03-M
Series: Kinetix 6200
UPC: 884951147812

Description:

The Allen-Bradley 2094-BM03-M belongs to the Kinetix 6000 series of drive components. This module is an integrated axis module. This 400 VAC category axis module has a constant current of 21.2 amps and a peak current range of 53.0 amps. It also has a symmetrical short-circuit rated current of 200,000 amps (RMS) and an efficiency level of 98 percent. The 2094-BM03-M has a continuous output rating of 13.5 kilowatts from the inverter. It also includes an internal shunt and an internal shunt resistor. It is also interoperable with LDC-C150400-DHT, LDC-C100600-DHT, and LDC-C150600-DHT linear motors.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2094-BM03-M is an element of the Kinetix 6000 multi-axis servo drive system. Through feedback connections, the 2904-BM03-M axis component interfaces with motion control devices including rotary and linear motors. Additionally, this axis module serves as the installation area for the control module, which integrates control signals from the system for proper device control. This axis module, along with the incorporated axis module, shunt modules, and slot filler modules, is installed on a power rail. The components that comprise a working Kinetix drive system vary according to the system's control requirements. The 2904-BM03-M is designed to work with Kinetix MPL motors. The 2094-BM03-M dissipates 94 watts at 20% load, 130 watts at 40% load, 169 watts at 60% load, 211 watts at 80% load, and 255 watts at 100% load. The 2094-BM03-M drive is intended for motor or drive applications that need integrated motion capabilities. The drive can quickly switch between safe torque off and safe speed monitor modes, as well as between SERCOS and EtherNet/IP networks. It is suitable with the Kinetix 6000 servo drive, allowing for simple transfer in the event of a failure. Due to the integrated safety function, no extra panel space or cabling for an external protection monitor is required. The secure speed monitor feature enables maintenance to be performed without totally shutting down the equipment. The modular architecture and inbuilt safety measures of the 2094-BM03-M drive provide simple maintenance and increased versatility. Additionally, it simplifies wiring, decreases inventory, and is modifiable using modern technologies. With its safe speed function, it eliminates energy and production waste and increases operational efficiency. Additionally, its inbuilt enhanced safety measures aid in staff protection. Additionally, safe top speed, safe maximal monitoring, safe direction tracking, zero speed checking, enabling switch control, and door supervision are included as safety features. The 2094-BM03-M has improved diagnostic tools that alert the user to a problem by presenting error messages.

Technical Specifications

Region of Manufacture* Mexico
Type Servo Drive

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2094-BM03-M?

Answer: Yes. We offer repairs for the 2094-BM03-M and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2094-BM03-M?

Answer: If you buy the 2094-BM03-M through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2094-BM03-M online?

Answer: Yes. Automation Stop sells the 2094-BM03-M online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2094-BM03-M?

Answer: The 2094-BM03-M is made by Allen Bradley - Drives.


Question: What type of product is the 2094-BM03-M?

Answer: The 2094-BM03-M is part of the Kinetix 6200 series.


Question: What Region of Manufacture* does the 2094-BM03-M have?

Answer: The Rockwell Automation 2094-BM03-M has a Mexico Region of Manufacture*.


Series information for 2094-BM03-M

For additional information about 2094-BM03-M check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2094-BM03-M.

Revision Part # Also Known As Availability
2094-BM03-M/A 2094-BM03-M Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2094-BMO3-M
  • 2094-8M03-M
  • 2094-8MO3-M
  • 2O94-BM03-M
  • 2O94-BMO3-M
  • 2O94-8M03-M
  • 2O94-8MO3-M

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP